Sensing stasis in your whirlpool washer? discover the root cause and solution
What To Know
- A malfunctioning valve can prevent the washer from detecting the correct water level, leading to a sensing error.
- The water level sensor detects the water level in the washer and sends signals to the control board.
- This can cause the washer to get stuck on sensing as it tries to detect the correct water level.
Experiencing a frustrating standstill with your Whirlpool washer stuck on sensing? Don’t panic! This common issue can be resolved with a few simple troubleshooting steps. Let’s dive into the possible causes and solutions to get your washer back in action.
1. Faulty Water Inlet Valve
The water inlet valve is responsible for regulating water flow into the washer. A malfunctioning valve can prevent the washer from detecting the correct water level, leading to a sensing error.
Solution: Test the valve with a multimeter. If it’s faulty, replace it.
2. Clogged Water Pressure Hose
A clogged water pressure hose can restrict water flow and interfere with the washer’s sensing process.
Solution: Disconnect the hose from the washer and inspect it for blockages. Clean or replace the hose if necessary.
3. Malfunctioning Pressure Switch
The pressure switch monitors the water level in the washer and sends signals to the control board. A faulty switch can provide incorrect information, causing the washer to get stuck on sensing.
Solution: Test the switch with a multimeter. If it’s defective, replace it.
4. Faulty Control Board
The control board is the brain of the washer, coordinating all its functions. A malfunctioning control board can disrupt the sensing process.
Solution: Contact a qualified technician to diagnose and repair or replace the control board.
5. Incorrect Water Supply
An inadequate water supply can prevent the washer from reaching the correct water level. Check the water pressure and ensure the water supply is turned on fully.
Solution: Increase the water pressure or contact a plumber if the water supply is limited.
6. Water Level Sensor Issues
The water level sensor detects the water level in the washer and sends signals to the control board. A faulty sensor can provide incorrect readings, leading to sensing errors.
Solution: Clean the sensor with a cloth or replace it if it’s damaged.
7. Drain Pump Problems
A malfunctioning drain pump can prevent the washer from draining water properly. This can cause the washer to get stuck on sensing as it tries to detect the correct water level.
Solution: Check for clogs in the drain pump and clear them. If the pump is faulty, replace it.
Wrapping Up: Troubleshooting Success
By following these troubleshooting steps, you can effectively resolve the “why won’t my Whirlpool washer go past sensing” issue. Remember to approach the problem methodically, checking each possible cause and applying the corresponding solution. With a bit of patience and effort, you can get your Whirlpool washer back in perfect working order.
Frequently Asked Questions
Q: Can I reset my Whirlpool washer to fix the sensing issue?
A: Yes, you can try resetting the washer by unplugging it from the power outlet for a few minutes and then plugging it back in.
Q: How can I prevent my Whirlpool washer from getting stuck on sensing in the future?
A: Regularly clean the water inlet valve, pressure hose, and water level sensor to prevent clogs. Ensure an adequate water supply and maintain the washer according to the manufacturer’s instructions.
Q: Is it safe to use my Whirlpool washer if it’s stuck on sensing?
A: No, it’s not recommended to use the washer if it’s stuck on sensing. Continuing to use it can damage the washer or lead to safety hazards.