Beko washing machine drainage woes: 5 common causes and simple fixes

A malfunctioning washing machine can be a major inconvenience, especially when it refuses to drain. If your Beko washing machine is giving you trouble in this regard, fret not! This comprehensive guide will delve into the potential causes and provide step-by-step troubleshooting solutions to help you restore your laundry routine.

1. Clogged Drain Hose

• Cause: The drain hose, which carries wastewater from the washing machine to the drainpipe, can become clogged with lint, hair, or other debris.
• Solution: Disconnect the drain hose from the back of the washing machine and the drainpipe. Inspect it for any blockages and remove them using a drain snake or a pair of pliers.

2. Blocked Drain Pump Filter

• Cause: The drain pump filter, located at the bottom of the washing machine, can trap small objects like coins, buttons, or socks. This can prevent the pump from draining the water.
• Solution: Open the access panel at the bottom of the machine and remove the filter. Clean it thoroughly under running water and replace it securely.

3. Faulty Drain Pump

• Cause: If the drain pump is malfunctioning, it may not be able to generate enough power to expel the water.
• Solution: Test the drain pump by running the machine with no clothes and no water. If you hear a humming or clicking sound but no water is being drained, the pump may need to be replaced.

4. Kinked or Crushed Drain Hose

• Cause: A kinked or crushed drain hose can restrict the flow of wastewater.
• Solution: Inspect the drain hose along its entire length for any bends or crimps. Straighten or replace the hose if necessary.

5. Blocked Drainpipe

• Cause: The drainpipe connected to the washing machine may be clogged with debris or scale buildup.
• Solution: Disconnect the drain hose from the drainpipe and pour a solution of baking soda and vinegar down the pipe. Let it sit for several hours and then flush with hot water.

6. Faulty Pressure Switch

• Cause: The pressure switch monitors the water level in the washing machine. If it malfunctions, it may not signal the drain pump to start draining.
• Solution: Test the pressure switch by blowing into the tube connected to it. If you don’t hear a click, the switch may need to be replaced.

7. Electronic Control Board Issue

• Cause: The electronic control board is responsible for controlling the various functions of the washing machine, including the draining cycle.
• Solution: Reset the electronic control board by disconnecting the washing machine from power for a few minutes and then reconnecting it. If the problem persists, the board may need to be repaired or replaced.

Wrapping Up

Troubleshooting a Beko washing machine that won’t drain can be a daunting task, but by following these steps, you can identify and resolve the issue efficiently. Remember to always disconnect the machine from power before attempting any repairs. If the problem persists or you encounter any difficulties, don’t hesitate to contact a qualified appliance repair technician.

Frequently Asked Questions

Q: Why is my Beko washing machine not draining all the water?
A: This could be due to a partially clogged drain hose, filter, or pump.

Q: How do I clean the drain pump filter on my Beko washing machine?
A: Refer to the user manual or our guide on “Blocked Drain Pump Filter” above.

Q: How can I tell if the drain pump is faulty?
A: Run the machine with no clothes and no water. If you hear a humming or clicking sound but no water is being drained, the pump may need to be replaced.

Q: Can I repair a faulty electronic control board myself?
A: Electronic control board repairs are complex and should be left to qualified technicians.

Q: How often should I clean the drain hose and filter?
A: Every 3-6 months to prevent clogs and ensure optimal performance.