Tired of a soggy laundry room? find out what’s preventing your samsung washer from draining
What To Know
- Disconnect the hose and use a drain snake or a wet/dry vacuum to remove any debris or build-up.
- The water level sensor detects the water level in the washer and signals the drain pump when to start draining.
- The drain pump may be faulty or there may be an obstruction in the drain hose or impeller.
Is your Samsung washer giving you the silent treatment, refusing to drain the water after a wash cycle? Don’t despair! This common issue can be easily resolved with a bit of troubleshooting and some DIY know-how. Let’s dive into the possible causes and solutions for this frustrating problem.
1. Clogged Drain Hose
The drain hose is the primary culprit when a Samsung washer won‘t drain. Check if it’s kinked, blocked by debris, or obstructed by a foreign object.
- Inspect the Hose: Examine the drain hose for any visible blockages or kinks.
- Clean the Hose: Disconnect the hose and use a drain snake or a wet/dry vacuum to remove any debris or build-up.
2. Blocked Drain Pump Filter
The drain pump filter traps lint, hair, and other small items that can accumulate over time, causing the pump to malfunction.
- Locate the Filter: The filter is typically located at the bottom front of the washer.
- Remove and Clean: Unscrew the filter cap and remove the filter. Rinse it thoroughly with water and replace it securely.
3. Faulty Drain Pump
If cleaning the drain hose and filter doesn‘t solve the issue, the drain pump itself may be faulty.
- Test the Pump: Disconnect the pump from the washer and power it directly using a multimeter to check for continuity.
- Replace the Pump: If the pump fails the test, it needs to be replaced.
4. Lid Switch Malfunction
The lid switch ensures that the washer only operates when the lid is closed. A faulty switch can prevent the washer from draining.
- Test the Switch: Use a multimeter to test the continuity of the lid switch.
- Replace the Switch: If the switch is defective, it needs to be replaced.
5. Faulty Control Board
The control board is the brain of the washer, controlling all its functions. A malfunctioning control board can disrupt the draining process.
- Reset the Board: Unplug the washer for a few minutes to reset the control board.
- Replace the Board: If resetting doesn’t solve the issue, the control board may need to be replaced.
6. Water Level Sensor Failure
The water level sensor detects the water level in the washer and signals the drain pump when to start draining. A faulty sensor can prevent the washer from draining properly.
- Test the Sensor: Use a multimeter to test the continuity of the water level sensor.
- Replace the Sensor: If the sensor fails the test, it needs to be replaced.
7. Other Possible Causes
- Debris in the Impeller: Check the impeller inside the washer tub for any debris that may be obstructing it.
- Drain Valve Solenoid Failure: The drain valve solenoid opens the drain valve to allow the water to drain. A faulty solenoid can prevent the washer from draining.
- Blockage in the Standpipe: The standpipe is the pipe that connects the drain hose to the drain. Check for any blockages or clogs in the standpipe.
Troubleshooting Tips
- Check the Water Supply: Ensure that there is adequate water supply to the washer.
- Reset the Washer: Unplug the washer for a few minutes to reset it.
- Use a Drain Cleaner: If the drain hose is partially clogged, you can try using a commercial drain cleaner to clear the blockage.
- Call for Professional Help: If you are unable to resolve the issue on your own, do not hesitate to call a qualified appliance repair technician.
FAQ
Q: Why is my Samsung washer not draining completely?
A: The drain hose, drain pump filter, or water level sensor may be blocked or faulty.
Q: Can I fix a faulty drain pump myself?
A: Yes, if you have some DIY experience. However, it is recommended to call a technician if you are not comfortable with electrical repairs.
Q: What is the most common cause of a Samsung washer not draining?
A: Clogged drain hose or drain pump filter.
Q: What should I do if my washer is making a loud noise when draining?
A: The drain pump may be faulty or there may be an obstruction in the drain hose or impeller.
Q: Can I use bleach to clean the drain hose?
A: No, bleach can damage the drain hose. Use a commercial drain cleaner instead.