Warming tips for cozy home heating
Guide

Why is my lg washer stuck in a drainage nightmare? find out now!

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er,...

What To Know

  • A kinked or bent drain hose can obstruct the flow of water, causing the washer to fail to drain.
  • Yes, you can clean the drain hose by disconnecting it from the washer and drainpipe and running water through it to remove any clogs.
  • Signs of a faulty drain pump include a humming or grinding noise during draining, a slow or incomplete draining process, or a burning smell.

If your LG washer has suddenly stopped draining, leaving you with a pool of water in the tub, you’re not alone. This common issue can be frustrating, but understanding the potential causes can empower you to resolve it efficiently.

Possible Causes of a Non-Draining LG Washer

1. Clogged Drain Hose

The drain hose, which carries wastewater from the washer to the drainpipe, can become clogged with lint, debris, or small objects.

2. Blocked Drain Pump Filter

The drain pump filter traps large particles and debris to prevent them from entering the pump. If it becomes clogged, water cannot pass through, resulting in a draining issue.

3. Faulty Drain Pump

The drain pump is responsible for expelling water from the washer. If it fails, the washer will not be able to drain properly.

4. Defective Drain Valve

The drain valve opens and closes to allow water to enter and exit the washer. If it malfunctions, the water may not be able to drain out.

5. Issues with the Control Board

The control board is the brain of the washer, regulating its functions. If it malfunctions, it may send incorrect signals to the drain pump or valve, preventing proper draining.

6. Kinked Drain Hose

A kinked or bent drain hose can obstruct the flow of water, causing the washer to fail to drain.

7. Overloading the Washer

Overloading the washer can strain the drain pump and prevent it from effectively removing water.

Troubleshooting Steps

1. Check the Drain Hose

Inspect the drain hose for any visible clogs or kinks. If it’s clogged, disconnect it from the washer and drainpipe and clean it with a hose or drain snake.

2. Clean the Drain Pump Filter

Locate the drain pump filter at the bottom of the washer and remove it. Clean any debris or lint that has accumulated on it.

3. Inspect the Drain Pump

If cleaning the drain pump filter doesn’t resolve the issue, you may need to replace the drain pump. Consult your washer’s user manual or contact a qualified technician for assistance.

4. Examine the Drain Valve

Check if the drain valve is opening and closing properly. If it’s not, it may need to be replaced.

5. Reset the Control Board

Unplug the washer from the power outlet for a few minutes and then plug it back in. This may reset the control board and resolve any software glitches.

6. Avoid Overloading the Washer

Always follow the recommended load capacity for your LG washer to prevent excessive strain on the drain system.

Final Note: Restoring Your Washer’s Drainage

Addressing the potential causes outlined in this guide can help you effectively resolve the issue of why your LG washer won’t drain. By following the troubleshooting steps thoroughly, you can restore your washer’s functionality and prevent further water accumulation.

Frequently Asked Questions

Q: Can I clean the drain hose myself?
A: Yes, you can clean the drain hose by disconnecting it from the washer and drainpipe and running water through it to remove any clogs.

Q: How often should I clean the drain pump filter?
A: The drain pump filter should be cleaned every 3-6 months, or more often if you notice a decrease in draining efficiency.

Q: What are the signs of a faulty drain pump?
A: Signs of a faulty drain pump include a humming or grinding noise during draining, a slow or incomplete draining process, or a burning smell.

Was this page helpful?

Rob Sanders

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er, Rob takes pride in testing out the latest tools and gadgets to see how they can make home projects easier. When it comes to heating systems, he's evaluated over 50 different furnace and boiler models over the years. Rob founded Nurturing Homeaid with his business partner Jim in 2020 to provide homeowners with genuine product recommendations they can trust. In his free time, Rob enjoys remodeling old homes with his family and traveling to visit architectural landmarks across the country. He holds a bachelor's degree in Journalism from Syracuse University.
Back to top button