Uncover the mystery: blinking washer lights – is your speed queen trying to tell you something?
What To Know
- A blinking light on your Speed Queen washer can be a frustrating sight, especially when you need clean clothes in a hurry.
- If the lid switch is faulty, it may not register that the lid is closed, causing the washer to stop mid-cycle and the lights to blink.
- A faulty water inlet valve may not allow water to flow into the washer, causing the washer to stop and the lights to blink.
A blinking light on your Speed Queen washer can be a frustrating sight, especially when you need clean clothes in a hurry. However, understanding the cause of the blinking lights can help you troubleshoot the issue and get your washer back up and running quickly. Here’s a comprehensive guide to help you diagnose the problem and find the solution.
Common Causes of Blinking Lights
- Lid Switch Failure: If the lid switch is faulty, it may not register that the lid is closed, causing the washer to stop mid-cycle and the lights to blink.
- Pressure Switch Malfunction: The pressure switch monitors the water level in the washer. If it malfunctions, the washer may not fill properly or may overfill, resulting in blinking lights.
- Drain Pump Blockage: A blocked drain pump can prevent water from draining from the washer. This can cause the washer to stop mid-cycle and display blinking lights.
- Water Inlet Valve Issue: A faulty water inlet valve may not allow water to flow into the washer, causing the washer to stop and the lights to blink.
- Control Panel Failure: In some cases, the control panel may malfunction, causing the lights to blink erratically.
Troubleshooting Steps
1. Check the Lid Switch:
- Open and close the lid several times to ensure the switch is working properly.
- If the lid switch is damaged or loose, it may need to be replaced.
2. Inspect the Pressure Switch:
- Disconnect the washer from the power source.
- Locate the pressure switch, typically near the bottom of the washer.
- Remove the hose connected to the pressure switch and blow into it. If air flows freely, the pressure switch is likely working.
- If air does not flow, the pressure switch may be clogged or faulty.
3. Clear the Drain Pump:
- Disconnect the washer from the power source.
- Remove the drain hose from the back of the washer.
- Check for any clogs or debris that may be blocking the pump.
- If the pump is clogged, clean it thoroughly before reconnecting the hose.
4. Test the Water Inlet Valve:
- Disconnect the washer from the power source.
- Turn off the water supply to the washer.
- Disconnect the water hoses from the back of the washer.
- Turn on the water supply and check for water flow.
- If water does not flow, the water inlet valve may be faulty.
5. Reset the Control Panel:
- Disconnect the washer from the power source for 30 seconds.
- Reconnect the washer and turn it on.
- If the control panel is malfunctioning, this may reset it and resolve the blinking light issue.
Professional Assistance
If you have tried all of the troubleshooting steps above and the blinking lights persist, it may be necessary to contact a qualified appliance repair technician. They can diagnose and repair the issue accurately, ensuring your Speed Queen washer is back in working order.
Conclusion: Troubleshooting Blinking Lights on Your Speed Queen Washer
Blinking lights on your Speed Queen washer can be a sign of a variety of issues. By following the troubleshooting steps outlined in this guide, you can identify the cause of the problem and find a solution. If the issue persists, do not hesitate to contact a professional appliance repair technician for assistance.
Frequently Asked Questions
Q: Why is my Speed Queen washer blinking all the lights?
A: This could indicate a serious issue, such as a faulty control panel or a major electrical problem. Contact a qualified appliance repair technician.
Q: What does it mean when my Speed Queen washer blinks 12 times?
A: 12 blinks typically indicate a lid switch failure. Ensure the lid is closed properly or replace the lid switch if necessary.
Q: How do I reset my Speed Queen washer?
A: Unplug the washer from the power source for 30 seconds and then reconnect it. This may reset the control panel and resolve any blinking light issues.
Q: Why is my Speed Queen washer stuck on the drain cycle?
A: A blocked drain pump or a faulty pressure switch can prevent the washer from draining properly. Clear the drain pump or replace the pressure switch as needed.
Q: How do I fix a blinking F01 error on my Speed Queen washer?
A: F01 error indicates a clogged drain pump. Clean the drain pump thoroughly and ensure there are no obstructions.