Solve the enigma: why your kenmore dishwasher’s clean light keeps flashing

The blinking clean light on your Kenmore dishwasher can be a perplexing sight, leaving you wondering what’s wrong and how to fix it. Don’t fret! This comprehensive guide will shed light on the possible causes and provide solutions to restore your dishwasher’s pristine performance.

Causes of Blinking Clean Light

1. Incomplete Cycle

• Problem: The dishwasher cycle was interrupted prematurely, leaving dishes unwashed.
• Solution: Ensure that the dishwasher door is securely closed throughout the entire cycle.

2. Clogged Filter

• Problem: Food particles and debris have accumulated in the filter, obstructing water flow.
• Solution: Remove and clean the filter regularly to maintain optimal performance.

3. Faulty Water Inlet Valve

• Problem: The valve fails to open properly, preventing water from entering the dishwasher.
• Solution: Check the valve for any blockages or leaks. Replace if necessary.

4. Broken or Loose Wire

• Problem: A loose or damaged wire disrupts the electrical connection to the clean light.
• Solution: Inspect the wiring for any visible damage. Tighten loose connections or replace damaged wires.

5. Malfunctioning Control Panel

• Problem: The control panel fails to register the completion of the cycle.
• Solution: Reset the control panel by turning off the dishwasher and unplugging it for a few minutes.

6. Faulty Door Latch

• Problem: The door latch fails to engage properly, causing the dishwasher to believe the door is open.
• Solution: Adjust or replace the door latch to ensure a secure closure.

7. Water Pressure Issues

• Problem: The water pressure is too low or high, affecting the dishwasher’s performance.
• Solution: Check the water supply and adjust the pressure accordingly.

Troubleshooting Tips

1. Restart the Dishwasher: Sometimes, a simple restart can resolve minor glitches.
2. Check the Water Supply: Ensure that the water supply is turned on and that the hoses are not kinked.
3. Clean the Filter: Regularly remove and clean the filter to prevent clogs.
4. Inspect the Wiring: Look for any loose or damaged wires and tighten or replace them.
5. Reset the Control Panel: Turn off the dishwasher and unplug it for a few minutes to reset the control panel.

When to Call for Professional Help

If you’ve tried the troubleshooting tips above and the blinking clean light persists, it’s advisable to contact a qualified appliance repair technician. They have the expertise and tools to diagnose and fix the issue accurately.

Final Thoughts

Understanding the reasons behind the blinking clean light on your Kenmore dishwasher empowers you to resolve the issue efficiently. By following the troubleshooting tips and addressing the underlying causes, you can restore your dishwasher to its optimal cleaning capabilities. Remember, if the problem persists, don’t hesitate to seek professional assistance for a comprehensive solution.

Answers to Your Most Common Questions

Q1. Why does my Kenmore dishwasher clean light blink even after the cycle is complete?
A1. This could indicate a clogged filter, faulty wiring, or a malfunctioning control panel.

Q2. Can I use my dishwasher with the clean light blinking?
A2. No, the dishwasher should not be used with the clean light blinking. This could lead to improper cleaning and damage to the appliance.

Q3. How often should I clean the filter on my Kenmore dishwasher?
A3. It’s recommended to clean the filter after every few washes to prevent clogs and ensure optimal performance.