Diagnose and conquer: the ultimate how-to test lg dryer motor and save money

If your LG dryer is giving you trouble, one of the first things you should check is the motor. A faulty motor can cause a variety of problems, including:

• The dryer not starting
• The dryer not spinning
• The dryer making a loud noise
• The dryer not drying clothes properly

Testing the motor is a relatively simple process that can be done with a few basic tools. In this blog post, we will walk you through the steps on how to test LG dryer motor.

Tools You Will Need

• Multimeter
• Screwdriver
• Socket wrench
• Pliers

Safety Precautions

Before you begin testing the motor, be sure to take the following safety precautions:

• Unplug the dryer from the power outlet.
• Allow the dryer to cool down completely.
• Wear safety glasses.

Step-by-Step Instructions

1. Remove the Back Panel of the Dryer

The first step is to remove the back panel of the dryer. To do this, locate the screws that are holding the panel in place and remove them. Once the screws are removed, carefully lift the panel off of the dryer.

2. Locate the Motor

Once the back panel is removed, you will be able to see the motor. The motor is usually located at the bottom of the dryer, behind the drum.

3. Disconnect the Wires from the Motor

Before you can test the motor, you need to disconnect the wires from it. To do this, use a screwdriver to loosen the screws that are holding the wires in place. Once the screws are loose, carefully pull the wires off of the motor terminals.

4. Test the Motor with a Multimeter

Now it’s time to test the motor with a multimeter. To do this, follow these steps:

1. Set the multimeter to the ohms setting.
2. Touch the probes of the multimeter to the terminals of the motor.
3. The multimeter should read a resistance of between 2 and 10 ohms. If the multimeter reads a resistance of 0 ohms, the motor is shorted. If the multimeter reads a resistance of infinity, the motor is open.

5. Inspect the Motor for Damage

If the motor tests good, you should inspect it for damage. Look for any signs of burning, fraying, or corrosion. If you find any damage, the motor will need to be replaced.

6. Reassemble the Dryer

Once you have tested the motor and inspected it for damage, you can reassemble the dryer. To do this, simply reverse the steps that you took to disassemble it.

Final Note: Troubleshooting LG Dryer Motor Issues

If you have followed the steps in this blog post and your LG dryer motor is still not working, there may be another problem with the dryer. You can try troubleshooting the other components of the dryer, such as the heating element, the thermostat, or the timer. If you are unable to fix the problem yourself, you may need to call a qualified appliance repair technician.

Frequently Asked Questions

Q: What are the symptoms of a faulty LG dryer motor?

A: The symptoms of a faulty LG dryer motor can include the dryer not starting, the dryer not spinning, the dryer making a loud noise, or the dryer not drying clothes properly.

Q: How do I test an LG dryer motor?

A: To test an LG dryer motor, you will need a multimeter. Set the multimeter to the ohms setting and touch the probes of the multimeter to the terminals of the motor. The multimeter should read a resistance of between 2 and 10 ohms. If the multimeter reads a resistance of 0 ohms, the motor is shorted. If the multimeter reads a resistance of infinity, the motor is open.

Q: How do I replace an LG dryer motor?

A: To replace an LG dryer motor, you will need to remove the back panel of the dryer, disconnect the wires from the motor, and remove the motor from the dryer. Once the motor is removed, you can install the new motor by reversing the steps that you took to remove the old motor.