The ultimate guide to transforming your crosley cruiser plus into a retro masterpiece
What To Know
- To do this, gently lift the tonearm and move the counterweight back and forth until the tonearm floats parallel to the platter.
- Place a record on the platter, lower the tonearm, and adjust the volume and speed to your liking.
- Ensure that the belt is properly seated and the turntable is on a level surface.
The Crosley Cruiser Plus is a stylish and convenient turntable that combines vintage aesthetics with modern functionality. Setting it up is a breeze, and you’ll be spinning your favorite records in no time. Follow these simple steps to get your Crosley Cruiser Plus up and running:
1. Unpack and Inspect
Carefully unpack your Crosley Cruiser Plus and inspect it for any damage that may have occurred during shipping. If you notice any issues, contact Crosley customer service immediately.
2. Attach the Platter and Belt
Place the platter on the turntable spindle and secure it with the included belt. Ensure that the belt is properly seated around both the platter and the motor pulley.
3. Install the Cartridge
Carefully remove the stylus guard and install the cartridge into the headshell. Align the cartridge with the stylus tip facing forward and gently tighten the screws to secure it.
4. Connect the Speakers
Connect the included speakers to the turntable using the provided cables. Ensure that the speaker wires are properly inserted into the terminals on the turntable and the speakers.
5. Plug in the Power
Connect the power cord to the turntable and plug it into a power outlet. The turntable will automatically turn on.
6. Adjust the Counterweight
Locate the counterweight at the rear of the tonearm and adjust it to balance the tonearm. To do this, gently lift the tonearm and move the counterweight back and forth until the tonearm floats parallel to the platter.
7. Set the Tracking Force
Once the tonearm is balanced, adjust the tracking force to the recommended setting for your cartridge. This is typically between 1.5 and 2.5 grams. Use the tracking force gauge included with your turntable to set the correct force.
8. Play a Record
Now that your Crosley Cruiser Plus is set up, you’re ready to play your records. Place a record on the platter, lower the tonearm, and adjust the volume and speed to your liking.
Troubleshooting Tips
If you encounter any issues while setting up or using your Crosley Cruiser Plus, refer to the following troubleshooting tips:
- No sound: Ensure that the speakers are properly connected and the volume is turned up.
- Distorted sound: Adjust the tracking force and cartridge alignment.
- Skipping: Clean the stylus and record surface.
- Speed issues: Ensure that the belt is properly seated and the turntable is on a level surface.
What People Want to Know
1. What records can I play on the Crosley Cruiser Plus?
You can play 33 1/3, 45, and 78 RPM records on the Crosley Cruiser Plus.
2. Can I connect the Crosley Cruiser Plus to external speakers?
Yes, you can connect the Crosley Cruiser Plus to external speakers using the RCA output jacks.
3. How do I clean the stylus on the Crosley Cruiser Plus?
Use a soft brush or stylus cleaning solution to gently remove dust and debris from the stylus.
4. How often should I replace the stylus on the Crosley Cruiser Plus?
The stylus should be replaced every 1000-1500 hours of use.
5. What is the warranty on the Crosley Cruiser Plus?
The Crosley Cruiser Plus comes with a one-year warranty.