Diy dishwasher drainage: a beginner’s guide to draining asko dishwashers

A clogged dishwasher can be a frustrating inconvenience, especially when you have a sink full of dirty dishes. Asko dishwashers are known for their reliability and efficiency, but even they can experience drainage issues from time to time. If your Asko dishwasher is not draining properly, it’s important to know how to set it to drain mode to remove the blockage and restore its functionality.

Understanding the Drain System

Before you begin, it’s helpful to understand the basic components of the Asko dishwasher‘s drain system:

• Drain hose: Carries wastewater from the dishwasher to the drainpipe.
• Drain pump: Forces the water through the drain hose.
• Check valve: Prevents wastewater from flowing back into the dishwasher.
• Float switch: Detects the water level in the dishwasher and triggers the drain pump when it reaches a certain level.

How to Set Asko Dishwasher to Drain

1. Safety First

Before starting any work on your dishwasher, unplug it from the power outlet and turn off the water supply.

2. Locate the Drain Filter

Open the dishwasher door and remove the bottom rack. The drain filter is typically located at the bottom of the dishwasher tub, covered by a small plastic cap.

3. Remove the Drain Filter

Unscrew the drain filter cap and pull out the filter. Check it for any visible blockages, such as food particles or debris.

4. Clean the Drain Filter

Rinse the drain filter under running water to remove any debris. If necessary, use a soft brush to gently scrub away any stubborn particles.

5. Inspect the Drain Hose

Pull out the dishwasher and locate the drain hose. Check for any kinks or clogs that may be obstructing the water flow.

6. Reset the Dishwasher

Close the dishwasher door and plug it back into the power outlet. Turn on the water supply and select a wash cycle. The dishwasher should start draining the water.

7. Monitor the Dishwasher

Keep an eye on the dishwasher while it is draining. If it stops draining or starts making unusual noises, stop the cycle and check for any further blockages.

Troubleshooting Common Drainage Issues

• No Draining: Check the drain filter, drain hose, and check valve for clogs. Reset the dishwasher and try again.
• Slow Draining: The drain hose may be kinked or clogged. Straighten the hose and remove any blockages.
• Dishwasher Not Filling: The float switch may be stuck. Tap on the float switch to free it.
• Excessive Noise During Draining: The drain pump may be faulty. Contact an authorized Asko technician for repair.

Additional Tips for Preventing Drainage Issues

• Regularly clean the drain filter to prevent blockages.
• Avoid putting large food scraps or non-dishwasher-safe items in the dishwasher.
• Run a hot water cycle with a dishwasher cleaner once a month to remove grease and buildup.
• If you have hard water, consider installing a water softener to reduce limescale buildup in the dishwasher.

Drain Mode vs. Reset Mode

It’s important to distinguish between drain mode and reset mode on Asko dishwashers:

• Drain mode: Used to manually drain the dishwasher of water, typically for maintenance or troubleshooting purposes.
• Reset mode: Resets the dishwasher’s control panel and cancels any active wash cycle.

Summary: Drain with Confidence

By following these steps, you can effectively set your Asko dishwasher to drain and resolve any drainage issues. Remember to regularly maintain your dishwasher to prevent future clogs and keep it running smoothly. If you encounter any persistent problems, don’t hesitate to contact an authorized Asko technician for professional assistance.

Answers to Your Questions

1. Why is my Asko dishwasher not draining?

Common causes include clogged drain filter, drain hose, or check valve.

2. How do I reset my Asko dishwasher to drain mode?

Follow the steps outlined in the blog post to locate and remove the drain filter, clean it, and reset the dishwasher.

3. Can I manually drain my Asko dishwasher?

Yes, you can manually drain your Asko dishwasher by disconnecting the drain hose from the drainpipe and allowing the water to flow out.

4. How often should I clean the drain filter in my Asko dishwasher?

It’s recommended to clean the drain filter every few months or as needed.

5. What is the difference between drain mode and reset mode?

Drain mode is used to manually drain the dishwasher, while reset mode cancels the active wash cycle and resets the control panel.