Exclusive: the insider’s guide to resetting whirlpool cabrio platinum washers (guaranteed results!)
What To Know
- A reset can help unclog the drain pump or hose, allowing the washer to drain properly.
- If the washer doesn’t reset after following the above steps, try unplugging it for a longer period, such as overnight.
- Can I reset the washer if it is showing an error code.
If your Whirlpool Cabrio Platinum washer is acting up, resetting it might be the solution you need. This blog post will provide a step-by-step guide on how to reset your washer, along with troubleshooting tips and answers to frequently asked questions.
Why Reset Your Whirlpool Washer?
Resetting your washer can resolve various issues, including:
- Error codes: Resetting can clear error codes that may be preventing the washer from operating correctly.
- Drainage problems: A reset can help unclog the drain pump or hose, allowing the washer to drain properly.
- Agitation or spinning issues: Resetting may fix problems with agitation or spinning, ensuring proper cleaning and drying.
- Unusual noises: A reset can sometimes eliminate strange noises coming from the washer.
Step-by-Step Reset Instructions
1. Unplug the Washer:
Unplug the washer from the electrical outlet. This will cut off power to the appliance.
2. Wait 60 Seconds:
Allow the washer to sit unplugged for 60 seconds. This gives the capacitors time to discharge and reset the electronic control board.
3. Replug the Washer:
Plug the washer back into the outlet.
4. Select a Cycle:
Turn the dial to select any wash cycle.
5. Hold the “Start/Pause” Button:
Press and hold the “Start/Pause” button for 5-10 seconds.
6. Release the Button:
Release the “Start/Pause” button.
7. Wait for the Cycle to Start:
The washer should automatically start the selected cycle.
Troubleshooting Tips
- If the washer doesn’t reset after following the above steps, try unplugging it for a longer period, such as overnight.
- Check the water supply and make sure there is adequate water pressure.
- Inspect the drain hose for any kinks or blockages.
- If the error code persists after resetting, consult the user manual or contact Whirlpool customer support.
Conclusion: Regaining Washer Functionality
Resetting your Whirlpool Cabrio Platinum washer is a simple yet effective way to address common issues. By following the steps outlined in this guide, you can restore your washer to proper functionality and ensure optimal performance.
FAQ
1. How often should I reset my Whirlpool Cabrio Platinum washer?
Resetting is not necessary on a regular basis. Only reset the washer if you encounter issues that cannot be resolved through other troubleshooting methods.
2. Can I reset the washer using the control panel?
No, the reset procedure outlined in this guide requires unplugging the washer and following the specific button combination.
3. What if the washer still doesn’t work after resetting?
If the washer continues to malfunction after resetting, it may indicate a more serious issue. Contact Whirlpool customer support for further assistance.
4. Is it safe to reset the washer while it is running?
No, never reset the washer while it is operating. Always unplug the washer before performing the reset procedure.
5. Can I reset the washer if it is showing an error code?
Yes, resetting can sometimes clear error codes. However, if the error code persists after resetting, consult the user manual or contact Whirlpool customer support.