Troubleshooting whirlpool cabrio he washer? resetting is the key!
What To Know
- Here’s a step-by-step guide on how to reset your Whirlpool Cabrio HE washer.
- Can I reset my washer if it is still running a cycle.
- Resetting the washer may clear the issue, but if the light persists, contact a technician.
If your Whirlpool Cabrio HE washer is experiencing issues, resetting it may resolve the problem. Resetting the washer clears any stored error codes and restores it to its default settings. Here’s a step-by-step guide on how to reset your Whirlpool Cabrio HE washer:
1. Unplug the Washer
Disconnect the washer from the power outlet for at least one minute. This will completely discharge the electrical system.
2. Press and Hold the Start/Pause Button
With the washer unplugged, press and hold the “Start/Pause” button for 10 seconds.
3. Plug the Washer Back In
While still holding the “Start/Pause” button, plug the washer back into the power outlet.
4. Release the Start/Pause Button
Continue holding the “Start/Pause” button for another 5 seconds, then release it.
5. Turn the Dial to the “Spin Only” Cycle
Rotate the cycle selector dial to the “Spin Only” cycle.
6. Press the Start/Pause Button
Press the “Start/Pause” button to initiate the spin cycle.
7. Wait for the Spin Cycle to Complete
Allow the spin cycle to complete entirely. This will reset the washer’s control module.
When to Reset Your Washer
Resetting your Whirlpool Cabrio HE washer can be beneficial in various situations, including:
- Error Codes: If your washer displays an error code, resetting it may clear the code and allow it to function normally.
- Unusual Noises: If your washer is making unusual noises, resetting it can potentially resolve the issue.
- Drainage Problems: If your washer is not draining properly, resetting it can reset the drain pump.
- Power Outages: After a power outage, resetting the washer can ensure it is functioning correctly.
Troubleshooting Common Issues
If you encounter any issues during the reset process, try the following troubleshooting tips:
- Ensure the Washer is Unplugged: Disconnect the washer from the power outlet before attempting to reset it.
- Hold the Button Long Enough: Press and hold the “Start/Pause” button for the full 10 seconds initially and 5 seconds after plugging it back in.
- Try Different Cycles: If the “Spin Only” cycle does not work, try selecting a different cycle and pressing “Start/Pause.”
Additional Tips
- Regular Maintenance: Regularly cleaning the washer’s filter and running a cleaning cycle can help prevent future issues.
- Check the Lid Switch: If the washer does not fill with water, the lid switch may be faulty.
- Inspect the Water Inlet Valves: Ensure the water inlet valves are open and supplying water to the washer.
Key Points
Resetting your Whirlpool Cabrio HE washer is a straightforward procedure that can resolve various issues. By following the steps outlined in this guide, you can restore your washer to its optimal performance. If you continue to experience problems after resetting, consider contacting a qualified appliance repair technician for further assistance.
What You Need to Learn
Q: How often should I reset my Whirlpool Cabrio HE washer?
A: Resetting your washer is not a regular maintenance task. Only reset it if you encounter issues or error codes.
Q: Can I reset my washer if it is still running a cycle?
A: No, you should never attempt to reset the washer while it is running. Always wait until the cycle is complete.
Q: What is the “Service” light on my washer?
A: The “Service” light indicates that the washer has detected an issue. Resetting the washer may clear the issue, but if the light persists, contact a technician.