Master the miele: resetting the active sc error like a pro
What To Know
- This could be due to a clogged water inlet valve, a faulty water pressure switch, or an issue with the water supply itself.
- To reset your Miele dishwasher, press and hold the reset button on the bottom of the door panel for at least five seconds.
- If the error persists, check the water inlet valve, test the water pressure switch, inspect the water supply, or contact Miele Support for assistance.
If you’re experiencing an “Active SC” error message on your Miele dishwasher, don’t panic. This common issue can be easily resolved with a simple reset. In this comprehensive guide, we’ll walk you through every step of the Miele dishwasher Active SC reset process, ensuring your appliance is back up and running in no time.
Understanding the Miele Dishwasher Active SC Error
The Active SC error typically indicates a problem with the dishwasher’s water supply. This could be due to a clogged water inlet valve, a faulty water pressure switch, or an issue with the water supply itself.
Step-by-Step Reset Instructions
1. Turn Off the Water Supply
Before resetting the dishwasher, it’s essential to turn off the water supply. Locate the water valve beneath the sink and turn it clockwise to close.
2. Unplug the Dishwasher
Disconnect the dishwasher from the electrical outlet. This will cut off all power to the appliance.
3. Drain the Dishwasher
Open the dishwasher door and remove any water from the bottom of the tub. You can use a cup or sponge to drain the water.
4. Locate the Reset Button
On most Miele dishwashers, the reset button is located on the bottom of the door panel. It’s usually a small, black button.
5. Press and Hold the Reset Button
Press and hold the reset button for at least five seconds. You should hear a beep or see a light flashing to indicate that the reset is complete.
6. Reconnect the Dishwasher
Plug the dishwasher back into the electrical outlet.
7. Turn On the Water Supply
Turn the water valve counterclockwise to open the water supply.
Additional Troubleshooting Tips
If the Active SC error persists after the reset, try the following troubleshooting tips:
- Check the water inlet valve: Ensure the water inlet valve is open and not clogged.
- Test the water pressure switch: Use a multimeter to check if the water pressure switch is functioning properly.
- Inspect the water supply: Verify that the water supply is turned on and that there are no leaks or clogs in the water line.
- Contact Miele Support: If you’re unable to resolve the issue yourself, contact Miele Support for assistance.
Wrapping Up
Resetting a Miele dishwasher Active SC error is a straightforward process that can be completed in just a few minutes. By following the steps outlined in this guide, you can quickly resolve the issue and get your dishwasher back in working order. Remember, if the error persists, don’t hesitate to contact Miele Support for further assistance.
Questions You May Have
1. What does the Active SC error mean?
The Active SC error typically indicates a problem with the dishwasher’s water supply.
2. How do I reset my Miele dishwasher?
To reset your Miele dishwasher, press and hold the reset button on the bottom of the door panel for at least five seconds.
3. What should I do if the Active SC error persists after the reset?
If the error persists, check the water inlet valve, test the water pressure switch, inspect the water supply, or contact Miele Support for assistance.