Troubleshooting lg washing machine error code ae: your machine’s errorless future starts here
What To Know
- Locate the water inlet valve, which is usually a solenoid valve connected to the water supply hose.
- This can be caused by a clogged water filter, a faulty water inlet valve, or a problem with the control board.
- Locate the water inlet filter, which is usually a small, mesh screen located at the back of the washing machine where the water hose connects.
Encountering error code AE on your LG washing machine can be frustrating. This error indicates a problem with the water supply, preventing the machine from filling properly. Resetting the machine can often resolve this issue, allowing you to resume your laundry cycle. Here’s a comprehensive guide on how to reset LG washing machine error code AE:
Unplug and Replug the Machine
1. Unplug the washing machine from the power outlet.
2. Wait for 1 minute to allow the machine to reset.
3. Plug the machine back into the outlet.
Check the Water Supply
1. Ensure that the water supply is turned on.
2. Check the water hoses for any kinks or leaks.
3. If necessary, clean the water inlet filters.
Clean the Pressure Switch
1. Remove the back panel of the washing machine.
2. Locate the pressure switch, which is usually a small, round device connected to the water inlet hose.
3. Clean the contacts of the pressure switch with a cotton swab or a soft cloth.
Inspect the Water Inlet Valve
1. Locate the water inlet valve, which is usually a solenoid valve connected to the water supply hose.
2. Remove the water inlet hose from the valve.
3. Use a multimeter to test the continuity of the valve. If the valve is faulty, replace it with a new one.
Reset the Control Board
1. Unplug the washing machine from the power outlet.
2. Remove the front panel of the washing machine.
3. Locate the control board, which is usually a large circuit board behind the control panel.
4. Remove the battery from the control board.
5. Wait for 1 minute.
6. Insert a new battery into the control board.
7. Reinstall the front panel.
Run a Diagnostic Cycle
1. Turn on the washing machine.
2. Press the “Diagnostic” button on the control panel.
3. The machine will run through a series of tests.
4. If any errors are detected, the machine will display the error code on the display.
Contact LG Support
If you have tried all of the above steps and are still unable to reset error code AE, contact LG support. They will be able to provide further assistance and may need to dispatch a technician to repair the machine.
In a nutshell: Troubleshooting LG Washing Machine Error Code AE
Resetting LG washing machine error code AE is a relatively straightforward process that can be performed by most homeowners. By following the steps outlined above, you can resolve the issue and get your washing machine back up and running in no time. Remember, if you encounter any difficulties or the error code persists, do not hesitate to contact LG support for assistance.
Frequently Discussed Topics
Q: What causes LG washing machine error code AE?
A: Error code AE indicates a problem with the water supply, preventing the machine from filling properly. This can be caused by a clogged water filter, a faulty water inlet valve, or a problem with the control board.
Q: How do I clean the water inlet filter?
A: Locate the water inlet filter, which is usually a small, mesh screen located at the back of the washing machine where the water hose connects. Remove the filter and rinse it thoroughly with clean water.
Q: How do I test the water inlet valve?
A: Use a multimeter to test the continuity of the water inlet valve. Disconnect the water hose from the valve and set the multimeter to the ohms setting. Touch one probe to each terminal of the valve. If the valve is working properly, the multimeter will display a low resistance reading.