Diy fix: reset your kenmore dryer thermostat in seconds
What To Know
- Set the multimeter to the ohms setting and touch the probes to the two terminals of the thermostat.
- To reset the thermostat, simply press the small reset button located on the side or bottom of the device.
- Resetting a Kenmore dryer thermostat is a simple and effective way to solve heating problems.
If your Kenmore dryer is not heating properly, it may be due to a faulty thermostat. Resetting the thermostat is a simple and quick fix that you can do yourself. Here’s a step-by-step guide on how to reset Kenmore dryer thermostat:
Materials You’ll Need:
- Screwdriver
- Multimeter (optional)
Step 1: Safety First
Before starting any work, unplug the dryer from the power outlet. This will prevent any electrical shock hazards.
Step 2: Locate the Thermostat
The thermostat is usually located near the heating element. It’s typically a small, round device with two wires connected to it.
Step 3: Disconnect the Wires
Using a screwdriver, carefully disconnect the two wires from the thermostat. Note the position of each wire so you can reconnect them correctly later.
Step 4: Test the Thermostat (Optional)
Using a multimeter, you can test the thermostat to confirm it’s faulty. Set the multimeter to the ohms setting and touch the probes to the two terminals of the thermostat. A reading of infinity indicates a faulty thermostat.
Step 5: Reset the Thermostat
To reset the thermostat, simply press the small reset button located on the side or bottom of the device. You may need to use a small screwdriver or paperclip to press the button.
Step 6: Reconnect the Wires
Reconnect the two wires to the thermostat, taking care to match the original positions. Tighten the screws securely.
Step 7: Test the Dryer
Plug the dryer back into the power outlet and start a test cycle. If the dryer heats up properly, the thermostat has been successfully reset.
Troubleshooting Tips:
- Dryer still not heating: If the dryer is not heating after resetting the thermostat, the heating element may be faulty. Contact a qualified appliance repair technician.
- Overheating: If the dryer overheats after resetting the thermostat, the thermostat may be set too high. Adjust the thermostat to a lower setting and test again.
- Error codes: Some Kenmore dryers display error codes related to the thermostat. Refer to the user manual for specific error code troubleshooting.
Wrap-Up:
Resetting a Kenmore dryer thermostat is a simple and effective way to solve heating problems. By following these steps, you can quickly diagnose and fix the issue yourself, saving time and money on repair costs. If you encounter any difficulties, don’t hesitate to contact a qualified appliance repair technician for assistance.
Quick Answers to Your FAQs
Q: How often should I reset my Kenmore dryer thermostat?
A: Resetting the thermostat is only necessary if you experience heating problems with the dryer.
Q: Can I use a different thermostat for my Kenmore dryer?
A: No, it’s crucial to use a thermostat specifically designed for Kenmore dryers.
Q: What are the signs of a faulty Kenmore dryer thermostat?
A: Common signs include uneven heating, overheating, or no heating at all.