Replace your whirlpool washer drain hose like a pro: the ultimate beginner’s guide
What To Know
- A clogged or damaged drain hose can leave your Whirlpool washer in a state of disarray, causing water to pool around the appliance and leave your laundry damp.
- Replacing the drain hose is a relatively simple task that can be completed in under an hour with the right tools and a bit of know-how.
- Loosen the clamp that secures the hose to the washer and carefully remove the hose.
A clogged or damaged drain hose can leave your Whirlpool washer in a state of disarray, causing water to pool around the appliance and leave your laundry damp. Replacing the drain hose is a relatively simple task that can be completed in under an hour with the right tools and a bit of know-how.
Tools and Materials You’ll Need:
- New Whirlpool washer drain hose
- Adjustable wrench
- Bucket
- Rags
- Flashlight (optional)
Step-by-Step Instructions:
1. Unplug the Washer and Shut Off the Water Supply:
Safety first! Unplug the washer from the power outlet and shut off the water supply valves at the back of the machine.
2. Locate the Drain Hose:
The drain hose is typically located at the back of the washer, near the bottom. It’s usually a corrugated black or gray hose that runs from the washer to the standpipe or drainpipe.
3. Disconnect the Old Drain Hose:
Using an adjustable wrench, loosen the clamp that secures the drain hose to the standpipe. Then, gently pull the hose off the standpipe.
4. Disconnect the Drain Hose from the Washer:
Follow the drain hose to where it connects to the washer. Loosen the clamp that secures the hose to the washer and carefully remove the hose.
5. Clean the Drain Hole:
Use the flashlight to inspect the drain hole on the washer. Remove any debris or blockages that may be preventing the water from draining properly.
6. Attach the New Drain Hose to the Washer:
Align the new drain hose with the drain hole on the washer and push it firmly into place. Secure the hose with the clamp.
7. Connect the Drain Hose to the Standpipe:
Run the drain hose to the standpipe or drainpipe. Slide the end of the hose over the standpipe and secure it with the clamp.
8. Test the Drain Hose:
Turn on the water supply and plug in the washer. Run a short wash cycle to check if the drain hose is functioning properly.
Troubleshooting Tips:
- If water is still not draining properly, check the drain pump for blockages.
- If the drain hose is kinked or twisted, it can restrict water flow. Straighten the hose and ensure it’s not pinched.
- If the clamps are not tight enough, water may leak from the hose connections.
Wrapping Up:
Replacing a Whirlpool washer drain hose is a straightforward task that can save you money and keep your laundry routine running smoothly. By following these steps and using the troubleshooting tips provided, you can ensure that your washer is draining efficiently and effectively.
Frequently Asked Questions:
Q: How often should I replace the drain hose on my Whirlpool washer?
A: It’s recommended to replace the drain hose every 5-7 years or as needed if it becomes clogged or damaged.
Q: Can I use any drain hose for my Whirlpool washer?
A: No, it’s important to use a Whirlpool-specific drain hose that is compatible with your washer model.
Q: How do I know if the drain pump is clogged?
A: Signs of a clogged drain pump include slow draining, loud noises during the drain cycle, or error codes related to draining.