Unlock the mysteries of whirlpool washer bellow replacement: ultimate guide for homeowners

If your Whirlpool washer is leaking from the bottom, it’s likely time to replace the bellow. The bellow is a rubber seal that connects the washer tub to the front panel. Over time, the bellow can become torn or worn, causing water to leak out. Replacing the bellow is a relatively simple repair that can be completed in a few hours.

Tools and Materials You’ll Need

• New Whirlpool washer bellow
• Screwdriver
• Pliers
• Bucket
• Towels

Step-by-Step Instructions

1. Unplug the Washer and Turn Off the Water Supply

Before you begin, unplug the washer and turn off the water supply.

2. Remove the Front Panel

Use a screwdriver to remove the screws that hold the front panel in place. Then, gently pull the front panel forward until it comes off.

3. Remove the Old Bellow

Use a screwdriver to remove the screws that hold the old bellow in place. Then, carefully pull the old bellow off the washer tub.

4. Clean the Washer Tub

Use a damp cloth to clean the washer tub where the new bellow will be installed.

5. Install the New Bellow

Place the new bellow over the washer tub and align the holes. Then, insert the screws and tighten them until the bellow is secure.

6. Reattach the Front Panel

Place the front panel back on the washer and insert the screws. Tighten the screws until the front panel is secure.

7. Reconnect the Water Supply and Plug in the Washer

Reconnect the water supply and plug in the washer. Run a test cycle to make sure there are no leaks.

Troubleshooting Tips

• If you have trouble removing the old bellow, you can use a pair of pliers to gently pry it off.
• If you have trouble installing the new bellow, make sure that it is properly aligned and that the screws are tightened securely.
• If you still have a leak after replacing the bellow, it is possible that there is another problem with the washer. You may need to call a professional appliance repair technician.

Conclusion

Replacing a Whirlpool washer bellow is a relatively simple repair that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of a professional repair.

FAQ

Q: How often should I replace the bellow on my Whirlpool washer?

A: The bellow should be replaced every 5-7 years, or more often if it becomes torn or worn.

Q: What are the signs that the bellow needs to be replaced?

A: The most common sign that the bellow needs to be replaced is a leak from the bottom of the washer. Other signs include a torn or worn bellow, or a bellow that is no longer properly sealing the washer tub.

Q: Can I replace the bellow on my Whirlpool washer myself?

A: Yes, replacing the bellow on a Whirlpool washer is a relatively simple repair that can be completed in a few hours. However, if you are not comfortable working on appliances, you may want to call a professional appliance repair technician.