Unlock the secrets: how to replace rollers in your kenmore dryer effortlessly

Is your Kenmore dryer making unusual noises or tumbling poorly? Worn-out rollers could be the culprit. Replacing these components is a relatively straightforward task that can improve your dryer’s performance and extend its lifespan. This comprehensive guide will provide you with step-by-step instructions on how to replace rollers in a Kenmore dryer.

Materials You’ll Need

• New dryer rollers
• Screwdriver (Phillips head)
• Socket wrench (1/4-inch)
• Belt tensioning tool (optional)

Safety Precautions

• Unplug the dryer from the power outlet.
• Allow the dryer to cool down completely before working on it.
• Wear safety glasses and gloves to protect yourself from sharp edges.

Step-by-Step Instructions

1. Remove the Front Panel

• Open the dryer door and locate the screws holding the front panel in place.
• Remove the screws and carefully lift the front panel off.

2. Disconnect the Belt

• Locate the dryer belt and use a screwdriver to disconnect it from the motor pulley and the idler pulley.
• Keep the belt in a safe place where it won’t get damaged.

3. Remove the Drum

• Remove the screws holding the drum in place.
• Carefully lift the drum out of the dryer cabinet.

4. Remove the Old Rollers

• Locate the rollers on the back of the drum.
• Use a socket wrench to remove the bolts holding the rollers in place.
• Carefully pull the old rollers off the drum.

5. Install the New Rollers

• Slide the new rollers onto the drum, aligning them with the bolt holes.
• Tighten the bolts using a socket wrench.

6. Reinstall the Drum

• Carefully lift the drum back into the dryer cabinet.
• Secure the drum with the screws.

7. Reconnect the Belt

• Place the dryer belt back over the motor pulley and the idler pulley.
• Use a belt tensioning tool to ensure the belt is properly tensioned.

8. Reinstall the Front Panel

• Align the front panel with the dryer cabinet and lift it into place.
• Secure the panel with the screws.

9. Test the Dryer

• Plug the dryer back into the power outlet.
• Start the dryer and listen for any unusual noises or vibrations.

Troubleshooting Tips

• Noise during tumbling: Loose or damaged rollers can cause noise. Ensure the rollers are securely tightened and replace any damaged ones.
• Poor tumbling performance: Worn-out rollers can reduce the drum’s ability to rotate smoothly. Replace the rollers to improve tumbling efficiency.
• Belt slipping: If the belt is not properly tensioned, it can slip off the pulleys. Use a belt tensioning tool to ensure the belt is tight enough.

When to Call a Professional

If you encounter any of the following issues, it’s recommended to call a professional appliance repair technician:

• Damaged dryer drum
• Electrical problems
• Excessive noise or vibrations

Popular Questions

1. How often should I replace the rollers in my Kenmore dryer?

Replace the rollers every 5-7 years or as needed if you notice any issues with the dryer’s performance.

2. Can I replace the rollers myself?

Yes, replacing the rollers is a DIY-friendly task with the right tools and instructions.

3. What brand of rollers should I use?

Use genuine Kenmore rollers or high-quality aftermarket replacements to ensure proper fit and performance.

4. How long does it take to replace the rollers?

Allow approximately 1-2 hours to complete the replacement process.

5. What other parts should I consider replacing while replacing the rollers?

Inspect the dryer belt and idler pulley for wear and tear. Replace these components if necessary.