Step-by-step guide: how to replace a miele washing machine drain pump and save on repairs
What To Know
- Replacing a drain pump is a relatively simple task that can be completed in an hour or two.
- Use a flathead screwdriver to loosen the hose clamps and disconnect the hoses from the drain pump.
- Replacing a Miele washing machine drain pump is a relatively simple task that can be completed in an hour or two.
A faulty drain pump can cause your Miele washing machine to perform poorly or not drain at all. Replacing a drain pump is a relatively simple task that can be completed in an hour or two. In this guide, we’ll provide you with step-by-step instructions on how to replace the drain pump in your Miele washing machine.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials:
- New Miele drain pump
- Philips screwdriver
- Flathead screwdriver
- Bucket or bowl
- Rags
Safety Precautions
Before working on your washing machine, unplug it from the power outlet and turn off the water supply.
Step-by-Step Instructions
1. Remove the Back Panel
Use a Philips screwdriver to remove the screws holding the back panel in place. Carefully lift the panel off the machine.
2. Locate the Drain Pump
The drain pump is typically located at the bottom of the washing machine, behind the front panel. It is usually a small, black or gray cylindrical device with two hoses attached to it.
3. Disconnect the Hoses
Use a flathead screwdriver to loosen the hose clamps and disconnect the hoses from the drain pump. Be prepared for some water to leak out.
4. Remove the Drain Pump
Use a Philips screwdriver to remove the screws holding the drain pump in place. Carefully pull the pump out of the machine.
5. Install the New Drain Pump
Insert the new drain pump into the machine and secure it with the screws.
6. Reconnect the Hoses
Attach the hoses to the drain pump and tighten the hose clamps.
7. Test the Drain Pump
Plug the washing machine back into the power outlet and turn on the water supply. Run a short wash cycle to test the drain pump.
Troubleshooting Tips
If the drain pump is not working properly after you replace it, check the following:
- Make sure the hoses are securely connected to the drain pump.
- Check the power cord to ensure it is plugged in properly.
- Reset the washing machine by turning it off and on again.
Takeaways
Replacing a Miele washing machine drain pump is a relatively simple task that can be completed in an hour or two. By following the steps outlined in this guide, you can save yourself the cost of hiring a professional appliance repair technician.
Quick Answers to Your FAQs
Q: How often should I replace the drain pump in my Miele washing machine?
A: The drain pump should be replaced every 5-7 years or as needed.
Q: What are the signs of a faulty drain pump?
A: Signs of a faulty drain pump include:
- The washing machine does not drain properly.
- The washing machine makes a loud humming noise during the drain cycle.
- The washing machine leaks water from the bottom.
Q: Can I replace the drain pump myself?
A: Yes, replacing the drain pump is a relatively simple task that can be completed in an hour or two. However, if you are not comfortable working on appliances, you may want to hire a professional appliance repair technician.