Diy guide: replacing your lg washer inlet valve without calling a plumber
What To Know
- Open the washer’s rear panel and locate the water inlet valve, which is typically a brass or plastic component connected to the back of the washer.
- Use an adjustable wrench to loosen the nuts connecting the water supply lines to the inlet valve.
- If the washer is making a loud noise when filling, the inlet valve may be faulty or the water pressure may be too high.
Replacing an LG washer inlet valve is a relatively straightforward task that can be completed in under an hour. However, it’s crucial to follow the correct steps to ensure a leak-free and efficient washer. This guide will provide you with a comprehensive overview of the process, from gathering the necessary tools to testing the new valve.
Tools and Materials Required
- New LG washer inlet valve
- Adjustable wrench
- Phillips head screwdriver
- Bucket or shallow pan
- Towels or rags
Safety Precautions
Before starting any work, it’s essential to take the following safety precautions:
- Unplug the washer from the electrical outlet.
- Turn off the water supply valves to the washer.
- Open the washer lid to release any remaining water or pressure.
Step-by-Step Replacement Instructions
1. Locate the Inlet Valve
Open the washer’s rear panel and locate the water inlet valve, which is typically a brass or plastic component connected to the back of the washer.
2. Disconnect the Water Supply Lines
Use an adjustable wrench to loosen the nuts connecting the water supply lines to the inlet valve. Place a bucket or pan underneath the lines to catch any dripping water.
3. Remove the Electrical Connector
Locate the electrical connector attached to the top of the inlet valve. Press the release tab and gently pull the connector straight up to disconnect it.
4. Unscrew the Inlet Valve
Using a Phillips head screwdriver, remove the screws holding the inlet valve in place. Carefully pull the valve straight out of the washer.
5. Install the New Inlet Valve
Align the new inlet valve with the mounting bracket and insert it into the washer. Secure it with the screws.
6. Reconnect the Electrical Connector
Plug the electrical connector into the top of the new inlet valve. Ensure it is securely connected.
7. Reconnect the Water Supply Lines
Tighten the nuts on the water supply lines using an adjustable wrench. Be careful not to overtighten.
8. Test the New Valve
Turn on the water supply valves and plug the washer back into the electrical outlet. Run a short wash cycle to check for any leaks.
Troubleshooting Tips
- If you experience any leaks after replacing the inlet valve, check the connections of the water supply lines and electrical connector.
- If the washer is not filling properly, ensure that the water supply valves are fully open.
- If the washer is making a loud noise when filling, the inlet valve may be faulty or the water pressure may be too high.
Recommendations: Washer Inlet Valve Replacement Made Easy
By following these steps and taking necessary precautions, you can successfully replace the LG washer inlet valve and restore your washer to optimal performance. Remember to address any issues or leaks promptly to prevent water damage or further problems.
Quick Answers to Your FAQs
Q1. How do I know if my LG washer inlet valve needs replacing?
A1. Signs of a faulty inlet valve include leaking, slow water filling, or loud noises during filling.
Q2. Can I replace the inlet valve myself?
A2. Yes, replacing the inlet valve is a relatively simple task that can be completed with basic tools and minimal plumbing knowledge.
Q3. What is the average cost of replacing an LG washer inlet valve?
A3. The cost of a new LG washer inlet valve typically ranges from $20 to $50, depending on the model.
