Save money and time: replace your lg washer drain pump yourself with our expert guide
What To Know
- Use pliers or a wrench to loosen the hose clamps and disconnect the drain hose and the hose leading to the water pump.
- If the washer still doesn’t drain, check for clogs in the drain hose or the drain pump filter.
- The cost of a replacement drain pump for an LG washer varies depending on the model, but it typically ranges from $50 to $150.
A faulty drain pump can leave your LG washer unable to drain water properly, leading to frustrating laundry mishaps. Replacing the drain pump is a relatively straightforward task that can save you time and money on professional repairs. Here’s a comprehensive guide on how to replace an LG washer drain pump:
Safety First
Before starting, unplug the washer from the power outlet and turn off the water supply. Wear gloves and safety glasses for protection.
Accessing the Drain Pump
1. Remove the front panel: Open the washer door and locate the screws along the top edge of the front panel. Remove the screws and carefully lift the panel off.
2. Disconnect the water hoses: Use pliers to disconnect the hot and cold water hoses from the washer.
3. Locate the drain pump: The drain pump is typically located at the bottom of the washer, behind the front panel. It’s a cylindrical or oval-shaped component with wires and hoses attached.
Removing the Old Drain Pump
1. Disconnect the wires: Unplug the electrical wires connected to the drain pump.
2. Disconnect the hoses: Use pliers or a wrench to loosen the hose clamps and disconnect the drain hose and the hose leading to the water pump.
3. Remove the drain pump: Unbolt the drain pump from its mounting bracket using a socket wrench.
Installing the New Drain Pump
1. Mount the new drain pump: Place the new drain pump into the mounting bracket and tighten the bolts.
2. Connect the hoses: Reconnect the drain hose and the hose leading to the water pump, and tighten the hose clamps.
3. Connect the wires: Plug the electrical wires back into the drain pump.
Reassembling the Washer
1. Reattach the front panel: Align the front panel with the washer and secure it with the screws.
2. Reconnect the water hoses: Hand-tighten the hot and cold water hoses onto the washer.
3. Plug in the washer: Reconnect the washer to the power outlet.
Testing the Washer
1. Run a test cycle: Turn on the water supply and start a short wash cycle.
2. Observe the drain pump: Listen for the sound of the drain pump running during the drain cycle.
3. Check for leaks: Inspect the drain pump and hoses for any leaks.
Troubleshooting Tips
- If the washer still doesn’t drain, check for clogs in the drain hose or the drain pump filter.
- If the drain pump is making a loud noise, it may be defective or obstructed by foreign objects.
- If you encounter any difficulties during the replacement process, consult the LG washer user manual or contact an authorized LG repair technician.
In a nutshell: Drain Pump Replacement Success
Replacing the drain pump in your LG washer can restore its functionality and prevent future water drainage issues. By following these simple steps, you can save on repair costs and ensure your washer operates smoothly.
Basics You Wanted To Know
Q: How long does it take to replace an LG washer drain pump?
A: The replacement process typically takes 30-60 minutes.
Q: What is the average cost of a replacement drain pump?
A: The cost of a replacement drain pump for an LG washer varies depending on the model, but it typically ranges from $50 to $150.
Q: Can I replace the drain pump on my own?
A: Yes, replacing the drain pump is a DIY-friendly task that can be completed with basic tools and a little technical knowledge.