Restore your lg washer to glory: step-by-step control board replacement guide
What To Know
- This guide will provide you with a step-by-step process on how to replace the LG washer control board, ensuring your appliance is back in top condition.
- The control board is typically located at the front of the washer, behind the control panel.
- Replacing the control board in an LG washer is a relatively straightforward process that can be completed by most homeowners with basic tools and skills.
If your LG washer is experiencing issues, replacing the control board may be necessary. This guide will provide you with a step-by-step process on how to replace the LG washer control board, ensuring your appliance is back in top condition.
Safety Precautions
- Unplug the washer from the power outlet.
- Turn off the water supply to the washer.
- Wear gloves and safety glasses for protection.
Tools and Materials Required
- Phillips screwdriver
- Torx screwdriver
- New LG washer control board
- Towels or rags
Step-by-Step Instructions
1. Remove the Top Panel
- Remove the screws holding the top panel in place.
- Lift the top panel and set it aside.
2. Locate the Control Board
- The control board is typically located at the front of the washer, behind the control panel.
3. Disconnect the Wires
- Carefully disconnect all the wires connected to the control board.
- Note the position of each wire for easy reconnection later.
4. Remove the Control Board
- Remove the screws securing the control board to the washer.
- Gently lift the control board out of its housing.
5. Install the New Control Board
- Place the new control board into the housing.
- Secure it with the screws.
6. Reconnect the Wires
- Reconnect all the wires to the new control board, following the notes you made earlier.
- Ensure all connections are secure.
7. Test the Washer
- Plug in the washer and turn on the water supply.
- Start a test cycle to verify the control board is functioning correctly.
Troubleshooting Tips
- If the washer does not power on, check the power supply and wiring.
- If the control panel is unresponsive, ensure all wires are connected securely.
- If the washer does not complete a cycle, check the water supply and drainage system.
The Bottom Line
Replacing the control board in an LG washer is a relatively straightforward process that can be completed by most homeowners with basic tools and skills. By following these steps carefully, you can restore your washer to full functionality and enjoy its reliable performance for years to come.
What You Need to Know
Q: What are the signs of a faulty control board?
A: Common signs include unresponsive buttons, incorrect cycle selection, and premature cycle termination.
Q: Can I repair the control board myself?
A: While it is possible, it requires advanced electronics knowledge and specialized tools. It is generally recommended to replace the entire control board.
Q: How long does it take to replace the control board?
A: The replacement process typically takes around 30 minutes to 1 hour.
Q: Can I use a universal control board for my LG washer?
A: No, it is essential to use a specific control board designed for your particular washer model.
Q: What is the average cost of replacing the LG washer control board?
A: The cost varies depending on the model, but it typically ranges from $100 to $250 for the part and labor.