Belt trouble solved: step-by-step guide to replacing your kirby vacuum cleaner belt

Replacing the belt on your Kirby vacuum cleaner is a relatively simple task that can be completed in a few minutes. By following these step-by-step instructions, you can ensure that your vacuum cleaner is operating at peak performance.

Materials You’ll Need:

• New Kirby vacuum cleaner belt
• Screwdriver

Step-by-Step Instructions:

1. Unplug the Vacuum Cleaner

Before beginning any work on your vacuum cleaner, always unplug it from the power outlet.

2. Remove the Bottom Plate

Using a screwdriver, remove the screws that hold the bottom plate in place. There are typically four to six screws located around the perimeter of the plate. Once the screws are removed, carefully lift the bottom plate off the vacuum cleaner.

3. Locate the Belt

The belt is typically located around the brushroll or beater bar. It is a black rubber band that connects the motor to the brushroll.

4. Remove the Old Belt

To remove the old belt, simply slip it off the brushroll. If the belt is worn or damaged, it may be necessary to cut it with a sharp knife.

5. Install the New Belt

Take the new belt and slip it over the brushroll. Make sure that the belt is properly seated in the grooves on the brushroll and motor.

6. Replace the Bottom Plate

Once the new belt is installed, carefully replace the bottom plate onto the vacuum cleaner. Align the holes in the plate with the screws and tighten them securely.

7. Test the Vacuum Cleaner

Plug the vacuum cleaner back into the power outlet and turn it on. Check to make sure that the brushroll is rotating smoothly and that the vacuum cleaner is operating properly.

Troubleshooting Tips:

• If the belt continues to slip off the brushroll, it may be necessary to replace the brushroll.
• If the vacuum cleaner is making a loud noise after replacing the belt, it may be necessary to adjust the belt tension.
• If the vacuum cleaner is not picking up dirt properly after replacing the belt, it may be necessary to clean or replace the filter.

Benefits of Replacing the Kirby Vacuum Cleaner Belt:

• Improves suction power
• Extends the life of the vacuum cleaner
• Prevents overheating
• Reduces noise

When to Replace the Kirby Vacuum Cleaner Belt:

The belt on your Kirby vacuum cleaner should be replaced every 6-12 months, or more frequently if you use the vacuum cleaner heavily. Signs that the belt needs to be replaced include:

• The belt is worn or damaged
• The brushroll is not rotating smoothly
• The vacuum cleaner is making a loud noise
• The vacuum cleaner is not picking up dirt properly

Takeaways:

Replacing the belt on your Kirby vacuum cleaner is an easy and inexpensive way to keep your vacuum cleaner operating at peak performance. By following these simple instructions, you can ensure that your vacuum cleaner is always ready to tackle your cleaning needs.