Simple diy trick: how to replace your kenmore 70 series dryer belt and save money
What To Know
- Replacing a dryer belt is a common repair task that can be easily accomplished with the right tools and instructions.
- Ensure the belt is properly seated in the grooves on both the pulley and the drum.
- Replacing a Kenmore 70 series dryer belt is a straightforward task that can be completed in under an hour.
Replacing a dryer belt is a common repair task that can be easily accomplished with the right tools and instructions. In this comprehensive guide, we’ll walk you through the step-by-step process of how to replace a Kenmore 70 series dryer belt, ensuring your machine runs smoothly and efficiently once again.
Safety Precautions
Before starting any repair, always ensure your safety by:
- Unplugging the dryer from the power outlet.
- Allowing the dryer to cool down completely.
- Wearing gloves to protect your hands.
Tools and Materials Required
- New Kenmore 70 series dryer belt
- Screwdriver
- Adjustable wrench
- Flashlight (optional)
Step-by-Step Instructions
1. Remove the Front Panel
- Open the dryer door and locate the two screws on the inside of the door frame.
- Remove the screws using a screwdriver.
- Carefully lift the front panel up and off the dryer.
2. Locate the Belt
- Once the front panel is removed, you’ll see the dryer drum and motor.
- The belt is located around the drum and the motor pulley.
3. Remove the Old Belt
- Use a flashlight to help you see if necessary.
- Slip the belt off the motor pulley first.
- Then, carefully pull the belt off the drum.
4. Install the New Belt
- Place the new belt around the motor pulley first.
- Then, stretch the belt over the drum.
- Ensure the belt is properly seated in the grooves on both the pulley and the drum.
5. Tension the Belt
- Use an adjustable wrench to loosen the motor mount bolts.
- Move the motor slightly forward to tension the belt.
- Tighten the motor mount bolts.
6. Reinstall the Front Panel
- Carefully lift the front panel back onto the dryer.
- Align the holes on the panel with the screws on the door frame.
- Insert and tighten the screws.
7. Test the Dryer
- Plug the dryer back into the power outlet.
- Turn on the dryer and run a short cycle.
- Listen for any unusual noises or vibrations.
Troubleshooting Tips
- If the dryer still makes a squealing noise, the belt may not be tensioned properly.
- If the dryer doesn’t heat up, the belt may be broken or damaged.
- If the dryer runs but doesn’t dry clothes, the belt may be slipping.
Wrapping Up
Replacing a Kenmore 70 series dryer belt is a straightforward task that can be completed in under an hour. By following these detailed instructions, you can save money and keep your dryer running smoothly. Remember to always prioritize safety and consult a professional if you encounter any difficulties.
Frequently Asked Questions
Q: How often should I replace my dryer belt?
A: It’s recommended to replace the dryer belt every 5-7 years or as needed.
Q: Can I use a different type of belt than the one recommended?
A: No, it’s crucial to use the exact belt specified for your Kenmore 70 series dryer to ensure proper fit and performance.
Q: What are the signs that my dryer belt needs to be replaced?
A: Squealing noises, reduced drying efficiency, or a dryer that doesn’t heat up can indicate a worn or damaged belt.