No more smelly washer! how to remove and clean your samsung washer filter in 3 simple steps

If you’re experiencing issues with your Samsung washer, such as decreased water flow or strange noises, it may be time to clean or replace the filter. Fortunately, removing the Samsung washer filter is a simple task that can be completed in just a few minutes.

Why Remove the Samsung Washer Filter?

The Samsung washer filter is designed to trap lint, hair, and other debris from entering the pump and causing damage. Over time, the filter can become clogged, which can lead to a number of problems, including:

• Decreased water flow
• Strange noises
• Error codes
• Reduced washing efficiency

How to Remove Samsung Washer Filter: Step-by-Step Guide

1. Unplug the Washer and Turn Off the Water Supply

Before you begin, unplug the washer from the electrical outlet and turn off the water supply valves located behind the unit.

2. Open the Filter Access Panel

Locate the filter access panel, which is typically located at the bottom right corner of the washer. Use a flathead screwdriver or coin to pry open the panel.

3. Remove the Filter

Once the access panel is open, you will see the filter. Grip the filter by the handle and pull it straight out.

4. Clean the Filter

Inspect the filter for any debris or buildup. Use a soft brush or cloth to remove any visible dirt or lint. You can also rinse the filter under running water.

5. Inspect the Drain Hose

While you have the filter removed, take a moment to inspect the drain hose for any kinks or blockages. If the drain hose is kinked, straighten it out. If it is blocked, remove the blockage using a pair of pliers.

6. Reinstall the Filter

Once the filter is clean, reinsert it into the washer by aligning it with the filter housing and pushing it in until it clicks into place.

7. Close the Filter Access Panel

Close the filter access panel by pressing down on it until it snaps shut.

How to Replace Samsung Washer Filter

If the filter is damaged or excessively clogged, it may need to be replaced. To replace the filter, follow these steps:

• Remove the old filter as described above.
• Purchase a new Samsung washer filter from a reputable retailer.
• Insert the new filter into the washer by aligning it with the filter housing and pushing it in until it clicks into place.
• Close the filter access panel.

How to Clean Samsung Washing Machine Filter Regularly

To prevent problems caused by a clogged filter, it’s important to clean it regularly. Here’s how to do it:

• Unplug the washer and turn off the water supply.
• Open the filter access panel and remove the filter.
• Rinse the filter under running water to remove any debris.
• Reinstall the filter and close the access panel.

How to Reset Samsung Washer Filter Light

Some Samsung washers have a filter light that indicates when the filter needs to be cleaned. To reset the filter light, follow these steps:

• Press and hold the “Power” button for 3 seconds.
• Press the “Filter” button.
• The filter light will turn off.

Troubleshooting Samsung Washer Filter Problems

If you’re having problems removing or cleaning the Samsung washer filter, here are a few troubleshooting tips:

• The filter is stuck. If the filter is stuck, try using a pair of pliers to gently pull it out.
• The filter is damaged. If the filter is damaged, it will need to be replaced.
• The filter light won’t reset. If the filter light won’t reset, try unplugging the washer for 30 seconds and then plugging it back in.

Popular Questions

Q: How often should I clean the Samsung washer filter?
A: You should clean the Samsung washer filter every 1-2 months, or more frequently if you wash large loads or use a lot of detergent.

Q: Can I use a different type of filter in my Samsung washer?
A: No, you should only use a Samsung-approved filter in your Samsung washer. Using a different type of filter could void your warranty.

Q: What happens if I don’t clean the Samsung washer filter?
A: If you don’t clean the Samsung washer filter, it can become clogged and cause a number of problems, including decreased water flow, strange noises, error codes, and reduced washing efficiency.