Empower your appliance: learn how to remove your kenmore dryer motor today
What To Know
- Install the motor pulley onto the shaft of the new motor and tighten it with the socket wrench.
- Replacing a Kenmore dryer motor is a fairly straightforward task that can be completed in a few hours.
- The cost of a new motor can range from $100 to $250, depending on the model.
If your Kenmore dryer is not spinning or making strange noises, it may be time to replace the motor. While replacing a dryer motor can seem daunting, it’s a task that most DIYers can accomplish with the right tools and instructions.
Tools and Materials You’ll Need
- Screwdriver
- Nut driver or wrench
- Socket wrench
- Pliers
- New Kenmore dryer motor
Safety Precautions
Before you begin, unplug the dryer from the power outlet and turn off the gas supply (if applicable). Allow the dryer to cool completely before starting any work.
Step-by-Step Instructions on How to Remove Kenmore Dryer Motor
1. Remove the Top Panel
Locate the screws holding the top panel in place and remove them. Carefully lift the top panel off the dryer.
2. Disconnect the Wires
Disconnect the wires connected to the motor. Use a screwdriver to loosen the terminal screws and gently pull the wires off.
3. Remove the Motor Mounting Screws
Locate the screws holding the motor in place and remove them. There are typically four mounting screws.
4. Slide the Motor Out
Gently slide the motor out of the dryer cabinet. Be careful not to damage the wires or other components.
5. Disconnect the Drive Belt
Locate the drive belt connecting the motor to the drum and remove it. You may need to use pliers to gently pry the belt off.
6. Remove the Motor Pulley
Use a socket wrench to remove the motor pulley. The pulley is located on the shaft of the motor.
7. Install the New Motor
Place the new motor into the dryer cabinet and align it with the mounting holes. Secure the motor with the mounting screws.
8. Install the Motor Pulley
Install the motor pulley onto the shaft of the new motor and tighten it with the socket wrench.
9. Connect the Drive Belt
Connect the drive belt to the motor pulley and the drum. Ensure that the belt is properly aligned and tensioned.
10. Reconnect the Wires
Connect the wires to the terminals on the new motor. Tighten the terminal screws securely.
11. Reinstall the Top Panel
Place the top panel back on the dryer and secure it with the screws.
Troubleshooting Tips
If you encounter any problems while removing the Kenmore dryer motor, here are some troubleshooting tips:
- Make sure that the power is disconnected and the dryer is completely cool.
- If you have difficulty removing the motor, use penetrating oil to loosen the screws.
- If the drive belt is damaged, replace it with a new one.
- If you are unsure about any step, refer to the dryer’s owner’s manual or consult a qualified appliance repair technician.
Wrapping Up
Replacing a Kenmore dryer motor is a fairly straightforward task that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring an appliance repair technician. Remember to always prioritize safety and refer to the dryer’s owner’s manual for specific instructions.
Information You Need to Know
Q: What are the symptoms of a faulty Kenmore dryer motor?
A: Symptoms may include the dryer not spinning, making strange noises, or overheating.
Q: Can I replace the Kenmore dryer motor myself?
A: Yes, most DIYers can replace the motor with the right tools and instructions.
Q: Where can I purchase a new Kenmore dryer motor?
A: You can purchase a new motor from appliance parts suppliers, home improvement stores, or online retailers.
Q: How long will it take to replace the motor?
A: The replacement time can vary depending on your skill level, but it typically takes a few hours.
Q: What is the average cost of replacing a Kenmore dryer motor?
A: The cost of a new motor can range from $100 to $250, depending on the model.
