Warming tips for cozy home heating
Guide

Step-by-step guide to cleaning your electrolux washing machine filter for optimal results

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er,...

What To Know

  • Use a wrench to loosen the water supply hose from the back of the machine.
  • By following the steps outlined in this guide, you can effectively remove the filters in your Electrolux washing machine and restore its optimal performance.
  • It is recommended to clean the drain filter every 3-6 months and the inlet filter annually.

A clean washing machine filter is crucial for maintaining the optimal performance and longevity of your appliance. If you’re experiencing issues with your Electrolux washing machine, such as poor drainage or excessive noise, clogged filters could be the culprit. This comprehensive guide will provide you with step-by-step instructions on how to remove the filter and restore your machine’s efficiency.

Locating the Filter

Electrolux washing machines typically have two types of filters: the drain filter and the inlet filter.

Drain Filter: Located at the bottom front of the machine, behind a small access panel.

Inlet Filter: Located at the back of the machine, where the water supply hose connects.

Tools Required

  • Flat-head screwdriver or coin
  • Bucket or large bowl
  • Rag or towel

Removing the Drain Filter

1. Prepare the area: Place a bucket or bowl under the access panel to catch any water that may drain out.
2. Open the access panel: Use a flat-head screwdriver or coin to gently pry open the access panel.
3. Unscrew the drain filter: Locate the drain filter cap and turn it counterclockwise to loosen it.
4. Remove the filter: Carefully pull out the filter. Be prepared for some water to drain out.
5. Clean the filter: Use a rag or towel to remove any lint, hair, or debris from the filter.
6. Reinsert the filter: Push the clean filter back into place and tighten the cap by turning it clockwise.
7. Close the access panel: Snap the access panel back into place.

Removing the Inlet Filter

1. Turn off the water supply: Close the water supply valve at the back of the machine.
2. Disconnect the water supply hose: Use a wrench to loosen the water supply hose from the back of the machine.
3. Remove the inlet filter: Locate the small mesh filter inside the water supply hose connection. Use a pair of pliers to carefully remove the filter.
4. Clean the filter: Rinse the filter under running water to remove any debris.
5. Reinsert the filter: Push the clean filter back into place.
6. Reconnect the water supply hose: Tighten the hose connection using a wrench.
7. Turn on the water supply: Open the water supply valve and check for leaks.

Troubleshooting Common Filter Issues

  • Clogged drain filter: Can cause poor drainage and excessive noise. Remove and clean the filter according to the instructions above.
  • Clogged inlet filter: Can restrict water flow and affect the machine’s performance. Remove and clean the filter as described in the previous section.
  • Damaged filter: If the filter is cracked or broken, it may need to be replaced. Contact Electrolux customer service for assistance.

Maintenance Tips

  • Check and clean the drain filter every 3-6 months, or more frequently if you notice any issues.
  • Clean the inlet filter annually to prevent debris from entering the machine.
  • Do not use harsh chemicals or detergents to clean the filters.

Final Thoughts: Restore Your Electrolux Washing Machine to Optimal Performance

By following the steps outlined in this guide, you can effectively remove the filters in your Electrolux washing machine and restore its optimal performance. Regular cleaning and maintenance of these filters will help prevent costly repairs and extend the lifespan of your appliance. Remember to check and clean the filters regularly, and if you encounter any issues, do not hesitate to contact Electrolux customer service for assistance.

Basics You Wanted To Know

Q: How often should I clean the Electrolux washing machine filter?
A: It is recommended to clean the drain filter every 3-6 months and the inlet filter annually.

Q: What happens if I don’t clean the washing machine filter?
A: Clogged filters can cause poor drainage, excessive noise, and decreased machine efficiency.

Q: Can I use bleach to clean the washing machine filter?
A: No, it is not recommended to use harsh chemicals or detergents to clean the filters. Use only water or a mild cleaning solution.

Q: Where can I find a replacement filter for my Electrolux washing machine?
A: Replacement filters can be purchased from Electrolux customer service or authorized retailers.

Q: My washing machine is still not draining properly after cleaning the filter. What should I do?
A: If the issue persists, there may be other problems with the machine. Contact Electrolux customer service for professional assistance.

Rob Sanders

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er, Rob takes pride in testing out the latest tools and gadgets to see how they can make home projects easier. When it comes to heating systems, he's evaluated over 50 different furnace and boiler models over the years. Rob founded Nurturing Homeaid with his business partner Jim in 2020 to provide homeowners with genuine product recommendations they can trust. In his free time, Rob enjoys remodeling old homes with his family and traveling to visit architectural landmarks across the country. He holds a bachelor's degree in Journalism from Syracuse University.
Back to top button