Ultimate solution to clogged asko dishwashers: definitive guide to drain pump removal

If your Asko dishwasher is giving you trouble draining, it could be due to a clogged drain pump. Removing and cleaning the drain pump is a relatively simple task that can be completed in about an hour. Here’s a step-by-step guide to help you through the process:

Tools and Materials You’ll Need:

• Phillips screwdriver
• Flathead screwdriver
• Bucket
• Rags
• Gloves

Safety Precautions:

Before you begin, make sure to unplug the dishwasher and turn off the water supply. Wear gloves to protect your hands from sharp edges.

Step-by-Step Instructions:

1. Remove the Drain Pump Cover:

• Locate the drain pump cover at the bottom of the dishwasher, usually behind the lower spray arm.
• Use a Phillips screwdriver to remove the screws holding the cover in place.
• Carefully lift the cover off.

2. Disconnect the Electrical Wires:

• Inside the drain pump housing, you’ll see two electrical wires connected to the pump.
• Use a flathead screwdriver to gently pry the wires off the terminals.

3. Disconnect the Drain Hose:

• Locate the drain hose connected to the drain pump.
• Use a pair of pliers to loosen the hose clamp and disconnect the hose.

4. Remove the Drain Pump:

• Grab the drain pump by the sides and pull it straight up to detach it from the dishwasher.
• Be careful not to spill any water that may have accumulated in the pump.

5. Clean the Drain Pump:

• Inspect the drain pump for any clogs or debris.
• Use a small brush or a pair of tweezers to remove any visible obstructions.
• Rinse the pump thoroughly with water.

6. Reinstall the Drain Pump:

• Align the drain pump with its mounting bracket and push it back into place.
• Secure the pump with the screws you removed earlier.

7. Reconnect the Drain Hose and Electrical Wires:

• Reattach the drain hose to the drain pump and tighten the hose clamp.
• Connect the electrical wires to the terminals on the pump.

8. Replace the Drain Pump Cover:

• Place the drain pump cover back over the housing and secure it with the screws.

Troubleshooting Tips:

• If the dishwasher still isn’t draining properly after cleaning the drain pump, check the following:
• The drain hose for kinks or blockages.
• The air gap for proper installation and function.
• The garbage disposal for any clogs or blockages.

In a nutshell:

By following these steps, you can easily remove and clean the drain pump in your Asko dishwasher. Regular maintenance can help prevent future clogs and ensure that your dishwasher continues to operate efficiently.

Questions You May Have

Q: How often should I clean the drain pump in my Asko dishwasher?
A: It’s recommended to clean the drain pump every 6-12 months, depending on usage.

Q: Can I use a dishwasher cleaner to unclog the drain pump?
A: Yes, but it’s important to follow the manufacturer’s instructions carefully. Some dishwasher cleaners can be corrosive if not used properly.

Q: What are some signs that my drain pump may be clogged?
A: Signs of a clogged drain pump include slow draining, standing water in the dishwasher tub, or a loud humming noise during operation.