End the overflow: how to drain a samsung washer and avoid catastrophes
What To Know
- A clogged washer can be a major inconvenience, especially if you’re in the middle of a wash cycle.
- If the drain hose or pump is clogged, you can try using a commercial drain unclogger to dissolve the blockage.
- Clean the washer regularly, check the drain hose for kinks, and avoid overloading the washer.
A clogged washer can be a major inconvenience, especially if you’re in the middle of a wash cycle. If your Samsung washer is refusing to drain, don’t despair! This detailed guide will walk you through the steps on how to make samsung washer drain effectively.
Check the Drain Hose
The drain hose is the first place to check when your Samsung washer is not draining. It may be kinked, clogged, or disconnected.
1. Inspect the Hose: Unplug the washer and pull it out from the wall. Check the drain hose for any kinks or clogs.
2. Clean the Hose: If the hose is clogged, disconnect it from the washer and run hot water through it to clear any debris.
3. Reattach the Hose: Reconnect the drain hose to the washer and make sure it is secure.
Clean the Drain Pump Filter
The drain pump filter can become clogged with lint, hair, and other debris, preventing the washer from draining properly.
1. Locate the Filter: The drain pump filter is usually located at the bottom right corner of the washer.
2. Remove the Filter: Open the access panel and remove the filter by turning it counterclockwise.
3. Clean the Filter: Rinse the filter thoroughly with hot water and remove any debris.
4. Reinstall the Filter: Replace the filter and tighten it clockwise.
Inspect the Drain Pump Impeller
The drain pump impeller is responsible for pumping water out of the washer. If it is damaged or clogged, the washer will not drain.
1. Locate the Impeller: Disconnect the washer from the power source. Remove the back panel of the washer to access the drain pump.
2. Check the Impeller: Inspect the impeller for any obstructions or damage.
3. Clean the Impeller: If the impeller is clogged, use a small brush or tweezers to remove any debris.
4. Reassemble the Pump: Reinstall the impeller and tighten the screws. Reconnect the washer to the power source.
Reset the Washer
Sometimes, a simple reset can fix a clogged washer.
1. Unplug the Washer: Disconnect the washer from the power outlet for at least 30 seconds.
2. Replug the Washer: Plug the washer back in and turn it on.
3. Run a Test Cycle: Select a short wash cycle and run it to see if the washer drains properly.
Check the Water Inlet Valves
If your Samsung washer is not draining, it may be due to a faulty water inlet valve.
1. Locate the Valves: The water inlet valves are located at the back of the washer.
2. Inspect the Valves: Check the valves for any leaks or damage.
3. Test the Valves: Disconnect the hoses from the valves and turn on the water supply. If water flows out of the valves, they are faulty and need to be replaced.
Call a Professional
If you have tried all of the above steps and your Samsung washer is still not draining, it may be necessary to call a qualified appliance repair technician.
Troubleshooting Tips
- Check for Error Codes: Samsung washers often display error codes on the control panel. Refer to the user manual to identify the error code and its solution.
- Use a Drain Unclogger: If the drain hose or pump is clogged, you can try using a commercial drain unclogger to dissolve the blockage.
- Clean the Washer Regularly: To prevent clogs, clean the washer regularly by running a hot water cycle with a cleaning solution.
Key Points: Unclog Your Samsung Washer with Confidence
By following the steps outlined in this guide, you can effectively make samsung washer drain and restore it to its optimal working condition. Remember to check for error codes, clean the washer regularly, and don’t hesitate to call a professional if needed.
Frequently Asked Questions
Q: Why is my Samsung washer not draining?
A: A clogged drain hose, pump filter, or impeller can prevent the washer from draining. Other potential causes include faulty water inlet valves or a reset issue.
Q: How can I prevent my Samsung washer from clogging?
A: Clean the washer regularly, check the drain hose for kinks, and avoid overloading the washer.
Q: How can I reset my Samsung washer?
A: Unplug the washer for at least 30 seconds, then plug it back in and turn it on. This can often resolve minor draining issues.