Beat the winter chill: discover the foolproof method for lighting your corona kerosene heater
What To Know
- This comprehensive guide will walk you through the process of lighting a Corona kerosene heater step-by-step, ensuring a safe and successful experience.
- To extinguish the flame, turn the wick knob counterclockwise until the wick is fully lowered.
- After each use, clean the exterior of the heater and the wick to prevent soot buildup.
In the chilly winter months, a kerosene heater can provide warmth and comfort to your home. However, lighting a kerosene heater can seem daunting, especially if you’re new to using one. This comprehensive guide will walk you through the process of lighting a Corona kerosene heater step-by-step, ensuring a safe and successful experience.
Gather Your Materials
Before you begin, make sure you have all the necessary materials:
- Corona kerosene heater
- Kerosene
- Kerosene can (with spout)
- Long-neck lighter or matches
- Funnel (optional, but recommended)
Safety First
- Always follow the manufacturer’s instructions carefully.
- Keep away from flammable objects and never leave the heater unattended.
- Do not use gasoline or other flammable liquids.
- Keep the heater in a well-ventilated area.
- Ensure the room has a carbon monoxide detector.
Step-by-Step Instructions
1. Fill the Tank
- Open the fuel cap on the heater.
- Using a funnel, carefully pour kerosene into the tank.
- Do not overfill the tank; leave about an inch of space at the top.
- Replace the fuel cap securely.
2. Prime the Wick
- Locate the wick knob on the heater.
- Turn the knob counterclockwise to raise the wick.
- Wait a few minutes for the kerosene to absorb into the wick.
3. Light the Wick
- Hold a long-neck lighter or a match near the wick.
- Light the wick and keep it lit for a few minutes.
4. Turn Up the Flame
- Slowly turn the wick knob clockwise to raise the flame.
- Adjust the flame to the desired height, typically between 6 and 8 inches.
5. Monitor the Flame
- Once the flame is established, monitor it regularly.
- If the flame becomes too high, turn down the wick knob.
- If the flame becomes too low, turn up the wick knob.
6. Extinguish the Flame
- To extinguish the flame, turn the wick knob counterclockwise until the wick is fully lowered.
- Wait a few minutes for the wick to cool down.
7. Clean the Heater
- After each use, clean the heater to prevent soot buildup.
- Use a damp cloth to wipe down the exterior.
- Remove the wick and clean it with a soft brush or cloth.
Troubleshooting Tips
Flame is Too High
- Turn down the wick knob.
- Check for soot buildup on the wick and clean it if necessary.
Flame is Too Low
- Turn up the wick knob.
- Check for debris or obstructions in the fuel tank or fuel line.
Flame is Unstable or Flickering
- Ensure the heater is placed on a level surface.
- Check for leaks in the fuel tank or fuel line.
Wick is Clogged
- Remove the wick and clean it with a soft brush or cloth.
- Replace the wick if necessary.
What You Need to Know
Q: How often should I clean the heater?
A: After each use, clean the exterior of the heater and the wick to prevent soot buildup.
Q: Can I use any type of kerosene?
A: No, use only clean, high-quality kerosene specifically designed for heaters.
Q: What should I do if I smell fumes?
A: Ventilate the area immediately and turn off the heater. Contact a qualified technician to inspect the heater.
Q: How long does a tank of kerosene last?
A: The duration depends on the heater size and usage, but typically between 8-12 hours.
Q: Is it safe to leave the heater running overnight?
A: No, never leave the heater unattended or running overnight.