Leveling maytag dryers made easy: our 5-minute guide to optimal laundry performance
What To Know
- If the front of the dryer is higher than the back, use an adjustable wrench to turn the front feet clockwise to lower them.
- If the back of the dryer is higher than the front, use the screwdriver to turn the back feet clockwise to lower them.
- The ideal height for a Maytag dryer is typically between 35 and 38 inches from the floor to the bottom of the base.
A level dryer is crucial for optimal performance, reducing noise, vibration, and wear and tear. This comprehensive guide will provide you with step-by-step instructions on how to level your Maytag dryer, ensuring a smooth and efficient operation.
Tools and Materials
- Level
- Adjustable wrench
- Screwdriver
- Carpenter’s pencil
- Measuring tape (optional)
Safety Precautions
- Unplug the dryer from the power outlet before beginning.
- Allow the dryer to cool down if it has been recently used.
- Wear gloves to protect your hands from sharp edges.
Step-by-Step Instructions
1. Check the Level
- Place the level on top of the dryer in both directions (front to back and side to side).
- Observe the bubble in the level. It should be centered within the lines.
2. Adjust the Front Feet
- If the front of the dryer is higher than the back, use an adjustable wrench to turn the front feet clockwise to lower them.
- If the front is lower than the back, turn the feet counterclockwise to raise them.
3. Check the Level Again
- Reposition the level on top of the dryer and check if the bubble is centered.
4. Adjust the Back Feet
- If the back of the dryer is higher than the front, use the screwdriver to turn the back feet clockwise to lower them.
- If the back is lower than the front, turn the feet counterclockwise to raise them.
5. Fine-Tune the Level
- Use the carpenter’s pencil to mark the current position of the feet on the floor.
- Carefully move the dryer away from the wall and check the level again.
- If necessary, make small adjustments to the feet until the dryer is perfectly level in both directions.
6. Measure the Height (Optional)
- If desired, measure the height from the floor to the bottom of the dryer’s base.
- Ensure that the height is the same on all four sides.
7. Tighten the Feet
- Once the dryer is level, tighten the feet by turning them clockwise with an adjustable wrench.
- Ensure that all feet are securely tightened.
Troubleshooting
- Dryer still vibrates: Check if the dryer is overloaded or if there are any unbalanced items inside.
- Dryer makes noise: Ensure that the dryer is not touching any objects or walls.
- Dryer does not dry clothes evenly: Leveling the dryer may not be the only issue. Check if the lint filter is clean and if the exhaust vent is clear.
Wrapping Up: Leveling Your Maytag Dryer
Leveling your Maytag dryer is a simple yet essential task that can significantly improve its performance and longevity. By following the steps outlined in this guide, you can ensure that your dryer operates smoothly, efficiently, and quietly.
What You Need to Learn
Q: How often should I level my Maytag dryer?
A: It is recommended to level your dryer every time it is moved or if you notice any vibrations or uneven drying.
Q: Can I use a spirit level instead of a level?
A: Yes, a spirit level can be used as an alternative to a regular level. However, ensure that it is accurate and calibrated.
Q: What is the ideal height for a Maytag dryer?
A: The ideal height for a Maytag dryer is typically between 35 and 38 inches from the floor to the bottom of the base.