Unblock your lg washer in no time: how to drain the drain pump
What To Know
- Locate the drain filter cap at the bottom of the washer, usually on the front or side panel.
- With the drain filter cleaned and the cap closed, run a drain cycle on the washer.
- Unplug the washer from the power outlet and wait a few minutes before plugging it back in and turning it on.
If you’re facing a flooded laundry room or an LG washer that’s refusing to drain, don’t panic. Follow this comprehensive guide to learn how to drain your LG washer quickly and effectively.
1. Safety First
Before attempting any draining procedures, ensure your safety by unplugging the washer from the power outlet and turning off the water supply to the machine.
2. Open the Drain Filter Cap
Locate the drain filter cap at the bottom of the washer, usually on the front or side panel. Use a coin or flathead screwdriver to open the cap counterclockwise.
3. Remove the Drain Filter
Once the cap is open, pull out the drain filter. Be prepared for water to spill out, so have a towel or container nearby.
4. Clean the Drain Filter
Inspect the drain filter for any debris or blockages. Remove any visible hair, lint, or other objects that may be obstructing the water flow. Use a soft brush or a toothpick to gently clean any stubborn particles.
5. Reinsert the Drain Filter
Once the filter is clean, reinsert it into the drain filter housing. Ensure it is securely in place and tightened to prevent leaks.
6. Close the Drain Filter Cap
Replace the drain filter cap by turning it clockwise until it is snug. Do not overtighten, as this can damage the cap or the washer.
7. Run a Drain Cycle
With the drain filter cleaned and the cap closed, run a drain cycle on the washer. This will empty any remaining water from the drum.
8. Check for Leaks
Once the drain cycle is complete, inspect the washer for any leaks. If you notice any water dripping or leaking, check the drain filter cap and ensure it is properly closed.
9. Reset the Washer
After draining the washer, it may need to be reset. To do this, unplug the washer from the power outlet and wait a few minutes. Then, plug it back in and turn it on.
10. Additional Tips
- If the drain filter is not accessible or difficult to remove, refer to your LG washer’s user manual for specific instructions.
- If the washer does not drain after following these steps, contact LG customer support or a qualified appliance repair technician.
- To prevent future drain issues, regularly clean the drain filter and avoid overloading the washer.
Wrapping Up
Draining an LG washer is a straightforward process that can be easily completed by following the steps outlined in this guide. By addressing drain problems promptly, you can keep your LG washer running smoothly and prevent costly repairs.
Top Questions Asked
Q: Why is my LG washer not draining?
A: Common causes include clogged drain filter, kinked drain hose, or a faulty drain pump.
Q: How often should I clean the LG washer drain filter?
A: Every few months or as needed, depending on usage and water quality.
Q: What if the drain filter cap is stuck?
A: Use a pair of pliers or a wrench to carefully loosen the cap. If it is still stuck, contact LG customer support.
Q: Can I use a wet/dry vacuum to drain the washer?
A: No, using a wet/dry vacuum can damage the washer’s internal components.
Q: How do I reset my LG washer after draining it?
A: Unplug the washer from the power outlet and wait a few minutes before plugging it back in and turning it on.