Lg washer drain dilemma solved! follow these simple hacks to drain with ease

If your LG washer is refusing to drain, leaving you with a soggy mess, fear not! This comprehensive guide will walk you through every step of the troubleshooting process, empowering you to resolve this issue and restore your washer to its draining glory.

Understanding the Drain Cycle

Every washing cycle consists of a drain phase, where the water is expelled from the washer. If this phase is malfunctioning, the washer will not be able to complete its cycle, leaving your clothes soaking wet.

Identifying the Root Cause

Before delving into troubleshooting, it’s crucial to identify the underlying cause of the drainage issue. Here are some common culprits:

• Clogged Drain Hose: A buildup of lint, debris, or small objects can obstruct the drain hose, preventing water from flowing out.
• Faulty Drain Pump: The drain pump is responsible for pumping the water out of the washer. If it fails or becomes clogged, the water will not drain.
• Damaged Pressure Switch: The pressure switch detects the water level in the washer. If it malfunctions, the washer may not recognize that it’s time to drain.
• Electronic Control Board Issue: The electronic control board coordinates the washer’s functions. A malfunction in this board can disrupt the drain cycle.
• Other Issues: Less common causes include a clogged drain filter, a faulty lid switch, or a kinked drain hose.

Troubleshooting Steps

1. Check the Drain Hose

• Disconnect the drain hose from the washer and inspect it for any blockages.
• Use a flashlight to look for any obstructions inside the hose.
• If you find any debris, remove it carefully using pliers or a wire hanger.
• Reattach the drain hose and run a quick drain cycle to test if the issue is resolved.

2. Clean the Drain Pump

• Locate the drain pump at the bottom of the washer.
• Remove the access panel and disconnect the pump from the washer.
• Check for any blockages inside the pump or the impeller.
• Clean the pump and impeller thoroughly using a soft brush or a damp cloth.
• Reassemble the pump and reconnect it to the washer.

3. Inspect the Pressure Switch

• Find the pressure switch, usually located near the top of the washer.
• Disconnect the electrical connectors and remove the pressure switch from the washer.
• Blow into the pressure switch to check if the diaphragm is functioning properly.
• If you don’t hear any clicking sounds, the pressure switch may be faulty and needs to be replaced.

4. Reset the Electronic Control Board

• Unplug the washer from the power source.
• Wait for a few minutes and then plug it back in.
• This will reset the electronic control board and may resolve any software glitches that may have affected the drain cycle.

5. Check for Other Issues

• Inspect the drain filter for any blockages.
• Ensure that the lid switch is functioning properly and that the lid is closed securely.
• Check for any kinks or damage to the drain hose.

6. Call a Professional

If the above troubleshooting steps fail to resolve the issue, it’s advisable to contact a qualified appliance repair technician. They have the expertise and tools to diagnose and repair more complex problems.

Preventing Future Drainage Issues

• Regularly clean the drain hose and drain filter to prevent blockages.
• Avoid overloading the washer with too many clothes.
• Use a mesh bag to catch lint and small objects that could clog the drain.
• If you experience frequent drainage problems, consider using a drain cleaner specifically designed for washing machines.

Beyond the Basics: Troubleshooting Advanced Issues

In some cases, the drainage issue may be caused by a more complex problem. Here are a few additional troubleshooting tips:

• Check the Water Supply: Ensure that the water supply to the washer is adequate. A weak water flow can affect the drain cycle.
• Inspect the Drain Valve: The drain valve opens to allow the water to drain out. If it’s faulty, the water may not drain properly.
• Test the Motor Coupling: The motor coupling connects the motor to the transmission. If it’s damaged or loose, it can disrupt the drain cycle.

Answers to Your Most Common Questions

1. Why is my LG washer not draining completely?

• The drain hose may be clogged, the drain pump may be faulty, or the pressure switch may be malfunctioning.

2. How can I reset my LG washer?

• Unplug the washer from the power source and wait for a few minutes before plugging it back in.

3. What is the cost of repairing a LG washer drain problem?

• The cost of repairs varies depending on the severity of the issue and the location of the service technician.

4. How often should I clean the drain hose?

• It’s recommended to clean the drain hose every three to six months to prevent blockages.

5. Can I use any drain cleaner in my LG washer?

• No, only use drain cleaners specifically designed for washing machines to avoid damaging the appliance.