Step-by-step solution: how to get your kenmore washer spinning again

Is your Kenmore washer refusing to spin, leaving your clothes damp and unwearable? Don’t despair! With this comprehensive guide, you’ll learn the ins and outs of getting your Kenmore washer spinning again.

1. Check the Power Supply

Ensure that your Kenmore washer is properly connected to a power outlet. Check if the electrical cord is securely plugged in and that the outlet is functioning.

2. Inspect the Drain Hose

A clogged drain hose can prevent your washer from draining properly, which can interfere with the spin cycle. Disconnect the drain hose from the washer and check for any obstructions. If you find any, remove them and flush the hose with warm water.

3. Clean the Drain Pump Filter

The drain pump filter can become clogged with debris, which can also hinder the spin cycle. Locate the drain pump filter at the bottom of the washer and remove it. Clean the filter thoroughly and replace it securely.

4. Check the Drive Belt

The drive belt is responsible for connecting the motor to the transmission, which allows the washer to spin. If the drive belt is loose or damaged, it can prevent the washer from spinning. Inspect the drive belt for any signs of wear or damage and replace it if necessary.

5. Examine the Lid Switch

The lid switch is a safety feature that prevents the washer from spinning if the lid is open. Ensure that the lid switch is functioning properly by pressing the lid down firmly. If the lid switch is faulty, it may need to be replaced.

6. Test the Motor

The motor is the heart of the washer and is responsible for powering the spin cycle. To test the motor, disconnect the washer from the power supply and remove the motor. Connect the motor directly to a power outlet and see if it spins. If the motor does not spin, it may need to be replaced.

7. Seek Professional Help

If you have tried all the above steps and your Kenmore washer still won’t spin, it’s time to call a professional appliance repair technician. They can diagnose the problem and perform the necessary repairs to get your washer spinning again.

Why is My Kenmore Washer Not Spinning?

There are several reasons why your Kenmore washer may not be spinning, including:

• Clogged drain hose or drain pump filter
• Loose or damaged drive belt
• Faulty lid switch
• Malfunctioning motor
• Electrical issues

How Long Does a Kenmore Washer Spin Cycle Take?

The length of a Kenmore washer spin cycle varies depending on the model and cycle selected. However, most spin cycles typically last between 5 and 15 minutes.

How to Spin Clothes in a Kenmore Washer

To spin clothes in a Kenmore washer, follow these steps:

1. Select the desired spin cycle on the washer control panel.
2. Press the “Start” button to initiate the spin cycle.
3. The washer will spin the clothes at the selected speed for the duration of the cycle.

How to Stop a Kenmore Washer Spin Cycle

To stop a Kenmore washer spin cycle, press the “Pause/Cancel” button on the washer control panel. The washer will stop spinning immediately.

How to Drain a Kenmore Washer Without Spinning

To drain a Kenmore washer without spinning, follow these steps:

1. Select the “Drain and Spin” cycle on the washer control panel.
2. Press the “Start” button to initiate the cycle.
3. The washer will drain the water from the tub without spinning the clothes.

Quick Answers to Your FAQs

Can I spin clothes in a Kenmore washer without using the spin cycle?

Yes, you can drain the water from the washer without spinning the clothes by selecting the “Drain and Spin” cycle.

How often should I clean the drain hose and drain pump filter?

It is recommended to clean the drain hose and drain pump filter every few months to prevent clogs and ensure proper drainage.

What are the signs of a faulty lid switch on a Kenmore washer?

A faulty lid switch may prevent the washer from spinning or starting a cycle. Signs of a faulty lid switch include:

• The washer does not start when the lid is closed.
• The washer stops spinning when the lid is opened.
• The washer lid does not close securely.