Step-by-step instructions: fixing bosch dishwasher error e14
What To Know
- The flow meter is a small device that measures the amount of water entering the dishwasher.
- If you have tried all of the above steps and the error E14 persists, it may be necessary to contact a qualified appliance repair technician.
- The cost of repairs can vary depending on the cause of the error and the type of dishwasher you have.
Error E14 in Bosch dishwashers indicates an issue with the water inlet system. This error can be frustrating, especially when you need clean dishes but can’t use your dishwasher. Fortunately, there are several steps you can take to troubleshoot and resolve this error on your own.
Causes of Error E14
- Clogged inlet hose
- Faulty water inlet valve
- Malfunctioning flow meter
- Water pressure issues
Troubleshooting and Resolution
1. Check the Water Inlet Hose
- Inspect the water inlet hose for any kinks, bends, or damage.
- Ensure that the hose is properly connected to both the dishwasher and the water supply.
- If the hose is damaged, replace it with a new one.
2. Test the Water Inlet Valve
- Unplug the dishwasher from the power outlet.
- Locate the water inlet valve, usually situated at the back of the dishwasher.
- Use a multimeter to test the continuity of the valve. If there is no continuity, replace the valve.
3. Inspect the Flow Meter
- The flow meter is a small device that measures the amount of water entering the dishwasher.
- If the flow meter is clogged or malfunctioning, it can trigger error E14.
- Clean the flow meter with a soft brush and check if the error persists.
4. Check Water Pressure
- Ensure that the water pressure to your dishwasher is adequate.
- You can use a water pressure gauge to measure the pressure.
- If the pressure is too low, adjust the pressure regulator or contact your water supplier.
5. Reset the Dishwasher
- If all else fails, try resetting the dishwasher.
- Unplug the dishwasher from the power outlet for 30 seconds.
- Plug it back in and start a wash cycle.
6. Contact a Professional
- If you have tried all of the above steps and the error E14 persists, it may be necessary to contact a qualified appliance repair technician.
Prevention Tips
To prevent error E14 from recurring, follow these tips:
- Clean the water inlet hose regularly.
- Ensure that the dishwasher is installed level and stable.
- Avoid overloading the dishwasher.
- Use a water softener if you have hard water.
Troubleshooting Conclusion
Resolving error E14 in Bosch dishwashers requires a systematic approach to identify and fix the underlying cause. By following the steps outlined above, you can get your dishwasher up and running again in no time.
What You Need to Know
Q: What is the cost to fix error E14 in a Bosch dishwasher?
A: The cost of repairs can vary depending on the cause of the error and the type of dishwasher you have. On average, it can range from $100 to $300.
Q: Can I fix error E14 myself?
A: Yes, it is possible to fix error E14 yourself if you have basic plumbing and electrical skills. However, if you are not comfortable working on appliances, it is recommended to contact a professional.
Q: How do I prevent error E14 from happening again?
A: Regular maintenance, proper installation, and avoiding overloading the dishwasher can help prevent error E14 from recurring.