Brush away the blues: easy hacks to fix a bissell vacuum’s spinning woes

If your Bissell vacuum has stopped spinning, it can be a frustrating experience. But before you rush out to buy a new one, there are a few things you can try to fix the problem yourself. In this comprehensive guide, we will delve into the potential causes of this issue and provide step-by-step instructions on how to resolve it.

Troubleshooting the Bissell Vacuum Not Spinning Issue

1. Check for Blockages in the Brushroll

One of the most common reasons why a Bissell vacuum stops spinning is due to blockages in the brushroll. Hair, pet fur, and other debris can accumulate around the brushroll, preventing it from rotating properly. To inspect the brushroll, follow these steps:

• Turn off and unplug the vacuum cleaner.
• Flip it over and locate the bottom plate.
• Remove the bottom plate to access the brushroll.
• Carefully remove any visible debris from the brushroll and the surrounding area.

2. Inspect the Brushroll Belt

The brushroll belt is responsible for driving the brushroll. If the belt is broken or loose, it can cause the brushroll to stop spinning. To check the brushroll belt:

• Remove the bottom plate as described in Step 1.
• Locate the brushroll belt, which is usually a thin, black belt wrapped around the brushroll.
• Check if the belt is broken or loose. If it is, replace it with a new one.

3. Examine the Drive Gear

The drive gear is another component that can affect the brushroll’s rotation. If the drive gear is damaged or worn, it can prevent the brushroll belt from engaging properly. To inspect the drive gear:

• Remove the bottom plate and the brushroll.
• Locate the drive gear, which is usually a small, plastic gear attached to the motor.
• Check if the drive gear has any visible damage or wear. If it does, replace it with a new one.

4. Clean the Motor Filter

A clogged motor filter can restrict airflow to the motor, causing it to overheat and potentially stop the brushroll from spinning. To clean the motor filter:

• Unplug the vacuum cleaner.
• Locate the motor filter, which is usually a small, cylindrical filter located near the motor.
• Remove the motor filter and clean it thoroughly with water. Let it dry completely before reinstalling it.

5. Check the Electrical Connections

Loose or damaged electrical connections can also cause the Bissell vacuum to stop spinning. To check the electrical connections:

• Unplug the vacuum cleaner.
• Remove the bottom plate and locate the electrical wires connecting the motor to the power cord.
• Inspect the wires for any visible damage or loose connections.
• Tighten any loose connections and replace any damaged wires.

6. Reset the Vacuum Cleaner

Sometimes, a simple reset can resolve the issue. To reset the Bissell vacuum cleaner:

• Unplug the vacuum cleaner and wait for a few minutes.
• Plug the vacuum cleaner back in and turn it on.
• Check if the brushroll is spinning properly.

7. Contact Bissell Support

If you have tried all of the above troubleshooting steps but the Bissell vacuum still won’t spin, you may need to contact Bissell support. They can provide further assistance and determine if the vacuum requires professional repair.

Wrapping Up: Troubleshooting Tips to Keep Your Vacuum Spinning

By following these troubleshooting tips, you can effectively resolve the issue of your Bissell vacuum not spinning. Remember to regularly clean and maintain your vacuum to prevent future problems. If the issue persists, do not hesitate to reach out to Bissell support for further assistance.

Questions You May Have

Q: Why is my Bissell vacuum not spinning?

A: There are several potential causes, including blockages in the brushroll, a broken or loose brushroll belt, a damaged drive gear, a clogged motor filter, loose or damaged electrical connections, or a software issue.

Q: How do I check for blockages in the brushroll?

A: Flip the vacuum over, remove the bottom plate, and carefully remove any visible debris from the brushroll and the surrounding area.

Q: How do I replace the brushroll belt?

A: Remove the bottom plate, locate the brushroll belt, and replace it with a new one. Ensure the new belt is properly aligned and tensioned.

Q: What are the signs of a damaged drive gear?

A: The drive gear may have visible damage, such as cracks or broken teeth. It may also make a grinding noise when the vacuum is running.

Q: How do I clean the motor filter?

A: Unplug the vacuum, locate the motor filter, remove it, and clean it thoroughly with water. Let it dry completely before reinstalling it.

Q: How do I reset the Bissell vacuum cleaner?

A: Unplug the vacuum for a few minutes, then plug it back in and turn it on. This may resolve minor software issues.