Avoid a watery mess: the ultimate guide to manual draining your whirlpool washer

If your Whirlpool washer is experiencing drainage issues, you may need to drain it manually. This can be a simple process that can be completed in a few minutes. Here’s a step-by-step guide on how to drain whirlpool washer manually:

Gather Your Tools

Before you begin, you will need to gather a few tools:

• A bucket or large container to hold the water
• A wet/dry vacuum cleaner (optional)
• A pair of pliers (optional)
• A flashlight (optional)

Locate the Drain Hose

The drain hose is typically located at the back of the washer. It is a large, black hose that connects to the drain pump.

Disconnect the Drain Hose

Once you have located the drain hose, disconnect it from the drain pump. You may need to use a pair of pliers to loosen the clamp that is holding the hose in place.

Drain the Water

Once the drain hose is disconnected, the water will begin to drain out. Hold the bucket or container under the hose to catch the water. If the water is not draining out, you can use a wet/dry vacuum cleaner to suck the water out of the hose.

Clean the Drain Hose

Once the water has been drained, inspect the drain hose for any clogs or debris. If you find any clogs, remove them using a pair of pliers or a flashlight.

Reconnect the Drain Hose

Once the drain hose is clean, reconnect it to the drain pump. Tighten the clamp to secure the hose in place.

Test the Washer

Once the drain hose is reconnected, test the washer to make sure it is draining properly. Run a small load of laundry and check to see if the water drains out.

Final Thoughts

Draining a Whirlpool washer manually is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can easily resolve any drainage issues that you may be experiencing.

Questions You May Have

Q: Why is my Whirlpool washer not draining?

A: There are several reasons why your Whirlpool washer may not be draining. The most common causes include:

• A clogged drain hose
• A faulty drain pump
• A blocked drain pipe
• A problem with the washer’s control board

Q: How can I prevent my Whirlpool washer from clogging?

A: There are several things you can do to prevent your Whirlpool washer from clogging:

• Clean the lint filter after every load of laundry
• Run a hot water cycle with a cup of white vinegar once a month
• Avoid overloading the washer
• Use the correct type of detergent for your washer

Q: How can I tell if my Whirlpool washer’s drain pump is faulty?

A: There are several signs that may indicate that your Whirlpool washer‘s drain pump is faulty:

• The washer is not draining properly
• The washer is making a loud noise when it is draining
• The washer is leaking water