Unclog your speed queen top loader washer in minutes! how to drain it now
What To Know
- The drain filter is located at the bottom of the washer, behind a small panel.
- If the drain hose and filter are clear, the next step is to check the drain pump.
- If you hear a humming sound or no sound at all when the washer is draining, the pump may be faulty.
If your Speed Queen top loader washer is refusing to drain, it can be a frustrating and inconvenient problem. But don’t worry, with a few simple steps, you can get your washer draining again in no time. Here’s a comprehensive guide to help you troubleshoot and drain your Speed Queen washer:
1. Check the Drain Hose
The first step is to check the drain hose for any kinks or blockages. Kinks can prevent water from draining properly, so make sure the hose is straight and free of any obstructions. If you find any kinks, gently straighten them out.
2. Clean the Drain Filter
The drain filter is located at the bottom of the washer, behind a small panel. It can become clogged with lint, hair, and other debris, preventing water from draining. To clean the filter, remove the panel and pull out the filter. Rinse it thoroughly with warm water and replace it.
3. Check the Drain Pump
If the drain hose and filter are clear, the next step is to check the drain pump. The pump is responsible for pumping water out of the washer, so if it’s not working properly, your washer won’t drain. To check the pump, locate it at the bottom of the washer and listen for any unusual noises. If you hear a humming sound or no sound at all, the pump may be faulty and need to be replaced.
4. Reset the Washer
Sometimes, a simple reset can fix a draining problem. To reset your Speed Queen washer, unplug it from the power outlet for at least 30 seconds. Then, plug it back in and try running a drain cycle.
5. Inspect the Lid Switch
The lid switch prevents the washer from running when the lid is open. If the switch is faulty, it can prevent the washer from draining. To check the lid switch, open and close the lid several times. If the washer doesn‘t start or stop when you open or close the lid, the switch may need to be replaced.
6. Call a Professional
If you’ve tried all of the above steps and your washer still won’t drain, it’s time to call a professional. A qualified technician can diagnose the problem and repair or replace any faulty parts.
Troubleshooting Common Draining Problems
Washer Won’t Drain at All
- Check the drain hose for kinks or blockages.
- Clean the drain filter.
- Check the drain pump.
- Reset the washer.
- Call a professional.
Washer Drains Slowly
- Check the drain hose for kinks or blockages.
- Clean the drain filter.
- Check the lid switch.
- Call a professional.
Washer Makes a Humming Noise When Draining
- Check the drain pump.
- Call a professional.
Takeaways: Draining Your Speed Queen Washer Made Easy
By following these steps, you can effectively drain your Speed Queen top loader washer and troubleshoot any underlying draining problems. Remember, if you encounter any difficulties, don’t hesitate to seek professional assistance. With proper maintenance and troubleshooting, you can keep your washer running smoothly for years to come.
Answers to Your Most Common Questions
Q: How often should I clean the drain filter?
A: It’s recommended to clean the drain filter every few months, or more frequently if you notice slow draining.
Q: Can I use a drain cleaner to unclog the drain?
A: No, it’s not recommended to use a drain cleaner in your Speed Queen washer. Drain cleaners can damage the washer’s components.
Q: How do I know if the drain pump is faulty?
A: If you hear a humming sound or no sound at all when the washer is draining, the pump may be faulty.