Drain your maytag performa washer like a pro: simple steps for a fast fix

Are you facing a flooded laundry room due to a clogged Maytag Performa washer? Don’t panic! Draining the washer and clearing the clog is a straightforward process that you can tackle yourself. This comprehensive guide will provide you with step-by-step instructions and troubleshooting tips to help you resolve the issue effectively.

Before You Begin: Safety Precautions

• Unplug the washer from the power outlet.
• Turn off the water supply to the washer.
• Wear gloves to protect your hands from sharp objects or cleaning agents.

Step 1: Locate the Drain Hose

• The drain hose is typically located at the back of the washer.
• It is a flexible, corrugated hose that connects the washer to the drainpipe.

Step 2: Remove the Drain Hose

• Use a pair of pliers to loosen the hose clamp at the end of the drain hose.
• Carefully pull the hose away from the drainpipe.
• Allow any remaining water to drain out into a bucket or sink.

Step 3: Inspect the Drain Hose

• Check the drain hose for any visible clogs or blockages.
• If you find any debris, use a flashlight to locate the exact location of the clog.

Step 4: Clear the Clog

• If the clog is in the drain hose, use a wire hanger or drain snake to push it through.
• If the clog is in the washer itself, you may need to remove the drain pump and clean it.

Step 5: Reattach the Drain Hose

• Once the clog is cleared, reattach the drain hose to the drainpipe.
• Tighten the hose clamp securely using the pliers.

Step 6: Test the Washer

• Plug the washer back into the power outlet and turn on the water supply.
• Run a short test cycle to ensure that the washer is draining properly.

Troubleshooting Tips

• No water draining: Check if the drain hose is kinked or crushed.
• Slow draining: The drain pump may be clogged or malfunctioning.
• Leaking from the drain hose: The hose clamp may be loose or damaged.
• Error code: The error code displayed on the washer’s control panel can provide additional information about the problem.

Wrap-Up: A Smooth-Running Washer

By following these steps and troubleshooting tips, you can effectively drain your Maytag Performa washer and restore it to its optimal working condition. Remember to keep the drain hose clean and free of debris to prevent future clogs.

Frequently Asked Questions

Q: Why is my Maytag Performa washer not draining?
A: Common causes include clogged drain hose, malfunctioning drain pump, or a kinked hose.

Q: How do I remove the drain pump on a Maytag Performa washer?
A: Refer to your washer’s user manual for specific instructions on how to remove the drain pump.

Q: Can I use a bleach solution to clean the drain hose?
A: Yes, but dilute the bleach with water and use it sparingly to avoid damaging the hose.