Lg washer top load drainage woes? here’s the quick and easy fix
What To Know
- If the drain filter cleaning doesn’t resolve the issue, locate the emergency drain hose, usually attached to the back of the washer.
- After cleaning or replacing the drain pump, reset the washer by unplugging it for a few minutes and then plugging it back in.
- Regular maintenance, such as cleaning the drain filter and checking the drain hose for blockages, can help prevent future problems and ensure the optimal performance of your washer.
If your LG top-load washer is refusing to drain, leaving you with a pool of water in the tub, it can be a frustrating experience. Fortunately, with the right steps, you can troubleshoot and drain your washer effectively. This comprehensive guide will provide you with detailed instructions on how to drain your LG top-load washer, along with troubleshooting tips to resolve any underlying issues.
Understanding the Drain System
Before attempting to drain your washer, it’s essential to understand how the drain system operates. LG top-load washers typically have a drain pump that forces water out through a drain hose connected to the drainpipe. If any blockages or malfunctions occur, the washer will be unable to drain properly.
Safety Precautions
Before starting any maintenance work, ensure that the washer is unplugged from the power outlet to prevent electrical hazards. Additionally, wear gloves and safety glasses to protect yourself from sharp objects or chemicals.
How to Drain LG Washer Top Load
1. Locate the Drain Filter
Open the lower front panel of your washer by pulling it towards you. Behind the panel, you will find the drain filter, usually located on the bottom right corner.
2. Remove the Drain Filter
Grasp the drain filter by the tab and pull it straight out. Be prepared for some water to spill out.
3. Clean the Drain Filter
Inspect the drain filter for any debris, such as hair, coins, or fabric lint. Remove any obstructions and thoroughly clean the filter with warm water.
4. Reinstall the Drain Filter
Once the drain filter is clean, reinsert it into its designated slot and push it firmly into place.
5. Use the Emergency Drain Hose
If the drain filter cleaning doesn’t resolve the issue, locate the emergency drain hose, usually attached to the back of the washer. Pull out the hose and place a shallow pan or bucket underneath it. Open the cap on the hose and allow the water to drain out.
6. Check the Drain Pump
If the emergency drain hose doesn‘t drain the water, the drain pump may be faulty. To access the drain pump, you will need to tilt the washer back and remove the bottom panel. Locate the drain pump, which is usually a black or gray cylinder with wires attached to it. Check for any blockages or damage to the pump or impeller.
7. Reset the Washer
After cleaning or replacing the drain pump, reset the washer by unplugging it for a few minutes and then plugging it back in. This will clear any error codes and allow the washer to resume normal operation.
Troubleshooting Common Drainage Issues
1. Washer Not Draining at All
- Check if the drain hose is kinked or clogged.
- Inspect the drain filter for blockages.
- Test the drain pump for proper operation.
2. Washer Draining Slowly
- Clean the drain filter and drain hose to remove any obstructions.
- Check if the drainpipe is clogged or has a reduced flow rate.
- Ensure that the washer is level and not tilted, which can affect drainage.
3. Washer Draining but Leaking
- Inspect the drain hose for cracks or holes.
- Check the connections between the drain hose and the drainpipe for leaks.
- Tighten any loose connections and replace damaged hoses.
Summary: Maintaining a Healthy Drainage System
By following the steps outlined in this guide, you can effectively drain your LG top-load washer and resolve common drainage issues. Regular maintenance, such as cleaning the drain filter and checking the drain hose for blockages, can help prevent future problems and ensure the optimal performance of your washer.
Answers to Your Questions
1. How often should I clean the drain filter?
Every 1-2 months, or more frequently if you notice any drainage issues.
2. Can I use bleach to clean the drain filter?
No, do not use bleach as it can damage the filter and other components.
3. What are the signs of a faulty drain pump?
The washer doesn‘t drain, makes loud noises during draining, or has a burning smell.
4. How do I reset the washer after cleaning the drain filter?
Unplug the washer for a few minutes and then plug it back in.
5. What should I do if I can’t find the emergency drain hose?
Contact LG customer support or a qualified appliance repair technician for assistance.