Step-by-step guide: how to drain your insinkerator hot water dispenser like a pro

A malfunctioning Insinkerator hot water dispenser can be a major inconvenience. If you’re facing this issue, don’t worry – draining the dispenser is a relatively simple process that can be completed in a few easy steps.

Safety Precautions

Before you begin, ensure your safety by following these precautions:

• Unplug the dispenser from the power outlet.
• Turn off the water supply to the dispenser.
• Allow the dispenser to cool down completely.

Step-by-Step Instructions

1. Locate the Drain Valve:

Find the drain valve located at the bottom of the dispenser. It is usually a small, white or black valve.

2. Attach a Hose:

Connect a rubber hose to the drain valve. The hose should be long enough to reach a drain or bucket.

3. Open the Drain Valve:

Slowly open the drain valve by turning it counterclockwise. Water will start flowing out through the hose.

4. Flush the Dispenser:

Let the water flow for several minutes to flush out any sediment or debris that may be blocking the dispenser.

5. Close the Drain Valve:

Once the water has stopped flowing, close the drain valve by turning it clockwise.

6. Reconnect the Water Supply:

Turn on the water supply to the dispenser.

7. Test the Dispenser:

Plug the dispenser back in and turn it on. Run hot water from the dispenser to check if it is functioning properly.

Troubleshooting Tips

• If no water is flowing out of the drain valve: Check if the water supply is turned on. If it is, the drain valve may be clogged. Try opening and closing the valve several times to dislodge any debris.
• If water is leaking from the dispenser: Ensure that the drain valve is closed tightly. If the leak persists, contact a qualified plumber.
• If the dispenser is still not working: Reset the dispenser by unplugging it for a few minutes and then plugging it back in. If the problem persists, contact Insinkerator customer support.

Maintenance and Prevention

To prevent future clogging, perform regular maintenance on your Insinkerator hot water dispenser:

• Flush the dispenser with hot water once a month.
• Clean the aerator on the spout regularly.
• Replace the water filter every 6 months.

Signs of a Clogged Insinkerator Hot Water Dispenser

• Slow or intermittent hot water flow
• No hot water flow
• Water leaking from the dispenser
• Unusual noises coming from the dispenser

What You Need to Know

Q: How often should I drain my Insinkerator hot water dispenser?
A: It is recommended to drain the dispenser every 3-6 months or as needed if you notice any signs of clogging.

Q: Can I use vinegar to clean my Insinkerator hot water dispenser?
A: Yes, you can use a 50/50 mixture of vinegar and water to flush the dispenser and remove scale buildup.

Q: What is the warranty on an Insinkerator hot water dispenser?
A: Most Insinkerator hot water dispensers come with a 1-year limited warranty.