Dyson animal vacuum deep clean: a step-by-step guide to ultimate disassembly

If your Dyson Animal vacuum cleaner is giving you trouble, you may need to disassemble it to clean or repair it. While this may seem like a daunting task, it’s actually quite simple with the right instructions. In this comprehensive guide, we’ll walk you through every step of the disassembly process, from removing the dustbin to detaching the motor.

Tools You’ll Need

• Phillips head screwdriver
• Torx T15 screwdriver
• Hex key
• Soft cloths

Step 1: Remove the Dustbin

• Press the dustbin release button located on the back of the vacuum cleaner.
• Pull the dustbin straight up and away from the vacuum.

Step 2: Detach the Wand

• Locate the wand release button on the bottom of the wand.
• Press the button and pull the wand straight up to detach it from the vacuum body.

Step 3: Remove the Brushroll

• Turn the vacuum cleaner upside down.
• Use a screwdriver to remove the screws holding the brushroll cover in place.
• Lift the brushroll cover off and remove the brushroll.

Step 4: Detach the Motor Head

• Flip the vacuum cleaner back over.
• Use a Torx T15 screwdriver to remove the screws securing the motor head to the vacuum body.
• Carefully lift the motor head off the vacuum.

Step 5: Remove the Cyclones

• Inside the motor head, you’ll find the cyclones.
• Use a hex key to remove the screws holding the cyclones in place.
• Pull the cyclones straight up to remove them.

Step 6: Detach the Motor

• Locate the motor inside the motor head.
• Use a Torx T15 screwdriver to remove the screws securing the motor to the motor head.
• Carefully lift the motor out of the motor head.

Step 7: Clean and Inspect

• Once you’ve disassembled the vacuum cleaner, take the time to clean and inspect all the components.
• Use a soft cloth to wipe away any dirt or debris.
• Check for any damaged or worn parts and replace them if necessary.

Reassembly

To reassemble the vacuum cleaner, simply follow the above steps in reverse order.

Troubleshooting Tips

• If you encounter any difficulties during the disassembly process, don’t force anything.
• Refer to the Dyson user manual for specific instructions or consult a qualified technician.
• If you notice any unusual noises or vibrations after reassembly, stop using the vacuum cleaner and contact Dyson support.

Answers to Your Most Common Questions

Q: Can I disassemble the Dyson Animal vacuum cleaner without any tools?
A: No, you will need a Phillips head screwdriver, Torx T15 screwdriver, hex key, and soft cloths to disassemble the vacuum cleaner.

Q: How often should I disassemble my Dyson Animal vacuum cleaner for cleaning?
A: It is recommended to disassemble and clean the vacuum cleaner every 6-12 months, depending on usage.

Q: Can I replace the motor in my Dyson Animal vacuum cleaner myself?
A: Yes, it is possible to replace the motor yourself if you have the necessary tools and experience. However, it is recommended to contact Dyson support if you are not comfortable performing this repair.