How to deep clean your bissell vacuum: step-by-step instructions for a pristine machine

Maintaining a clean and efficient Bissell vacuum is crucial for optimal performance and longevity. Regular deep cleaning is essential to remove accumulated dirt, debris, and allergens, ensuring your vacuum operates at its peak. This comprehensive guide will walk you through every step of deep cleaning your Bissell vacuum, leaving it spotless and ready to tackle any cleaning challenge.

Disassembling the Vacuum

1. Unplug the Vacuum: Before starting, always unplug the vacuum from the power source for safety.
2. Empty the Dirt Tank: Remove the dirt tank and empty its contents into a trash can.
3. Detach the Brushroll: Flip the vacuum over and locate the brushroll. Pull up on the release tabs to detach the brushroll.
4. Remove the Filter: Open the filter compartment and remove the filter.

Cleaning the Dirt Tank and Filter

1. Wash the Dirt Tank: Use warm water and a mild detergent to wash the dirt tank. Rinse thoroughly and allow it to air dry completely.
2. Clean the Filter: Tap the filter to remove loose debris. If washable, rinse it under running water until the water runs clear. If non-washable, replace it with a new filter.

Deep Cleaning the Brushroll

1. Remove Hair and Debris: Use scissors to carefully cut away any hair or debris wrapped around the brushroll.
2. Wipe Down the Brushroll: Use a damp cloth to wipe down the brushroll, removing any remaining dirt or debris.
3. Lubricate the Brushroll: Apply a small amount of lubricant to the brushroll bearings to ensure smooth operation.

Cleaning the Exterior and Accessories

1. Wipe Down the Exterior: Use a soft cloth dampened with water to wipe down the exterior of the vacuum, including the handle, cord, and body.
2. Clean the Crevice Tool: Use a small brush or cotton swab to remove any debris from the crevice tool.
3. Clean the Upholstery Tool: If your vacuum has an upholstery tool, use a damp cloth to wipe it down and remove any pet hair or debris.

Reassembling the Vacuum

1. Insert the Filter: Place the clean filter back into the filter compartment.
2. Attach the Brushroll: Align the brushroll and slide it back into place until it clicks into position.
3. Reattach the Dirt Tank: Insert the clean dirt tank back into the vacuum and secure it.

Troubleshooting Common Issues

1. Vacuum Not Picking Up Dirt: Check if the brushroll is tangled or clogged. Clean or replace the brushroll as needed.
2. Vacuum Making Loud Noises: Inspect the brushroll for any damage or debris. Lubricate the brushroll bearings if necessary.
3. Vacuum Not Turning On: Ensure the vacuum is properly plugged in and check the power cord for any damage.

Takeaways: A Spotless and Efficient Vacuum

By following these step-by-step instructions, you can effectively deep clean your Bissell vacuum and restore its optimal performance. Regular deep cleaning will extend the lifespan of your vacuum, improve its cleaning efficiency, and ensure a healthier indoor environment.

What You Need to Know

1. How often should I deep clean my Bissell vacuum?

Every 6-12 months, depending on usage frequency.

2. Can I use any type of cleaner to wash the dirt tank and filter?

No, use only mild detergents that are safe for plastics.

3. How do I know if my brushroll needs to be replaced?

If the brushroll is visibly damaged, tangled, or worn, it should be replaced.

4. Can I use a vacuum cleaner to clean my Bissell vacuum?

No, do not use a vacuum cleaner to clean your Bissell vacuum, as it may damage the components.

5. How do I dispose of the used filter?

Dispose of the used filter in the trash. If it is a washable filter, rinse it thoroughly before discarding it.