Stop wasting time! the quick and easy way to clean your speed queen washer filter

Maintaining a clean Speed Queen washer is crucial for its optimal performance and longevity. One essential aspect of washer maintenance is regularly cleaning the filter to prevent clogs and ensure efficient drainage. This blog post will provide a comprehensive guide on how to clean the filter of your Speed Queen washer, ensuring a smooth-running and trouble-free laundry experience.

Identifying the Filter Location

The filter in a Speed Queen washer is typically located at the bottom of the agitator, which is the central column inside the washer tub. To access the filter, you will need to remove the agitator.

Removing the Agitator

1. Unplug the washer from the power outlet.
2. Grasp the top of the agitator and lift it straight up.
3. If the agitator is stuck, gently rock it back and forth while pulling upwards.

Locating and Removing the Filter

Once the agitator is removed, you will see a black tube-like component at the bottom of the washer tub. This is the filter housing.

1. Reach down and locate the filter cap on the filter housing.
2. Turn the filter cap counterclockwise to loosen it.
3. Pull out the filter from the filter housing.

Cleaning the Filter

The filter may be clogged with lint, hair, or other debris. To clean it effectively:

1. Rinse the filter thoroughly under running water.
2. Use a soft brush or sponge to remove any stubborn debris.
3. Inspect the filter for any tears or damage. If damaged, replace the filter.

Reinstalling the Filter

Once the filter is clean, it’s time to reinstall it:

1. Insert the filter back into the filter housing.
2. Turn the filter cap clockwise to tighten it.
3. Reinstall the agitator by aligning it with the base of the washer tub and pressing down firmly.

Resetting the Washer

After cleaning the filter, it’s important to reset the washer to clear any error codes that may have been triggered by the clogged filter.

1. Plug the washer back into the power outlet.
2. Turn the dial to any cycle and press the “Start” button.
3. Allow the washer to complete the cycle.

Signs of a Clogged Filter

Knowing when to clean the filter is crucial to prevent drainage issues. Some signs of a clogged filter include:

• Slow or no drainage
• Water leaking from the bottom of the washer
• Excessive noise during the spin cycle
• Error codes related to drainage

Regular Maintenance Tips

To keep your Speed Queen washer running smoothly, consider the following maintenance tips:

• Clean the filter every 3-6 months, or more frequently if needed.
• Check the hoses and connections regularly for leaks.
• Run a hot water cycle with a cup of white vinegar every month to remove mineral buildup.
• Leave the washer door and lid open after use to allow it to air out.

Final Thoughts: Maintaining a Pristine Speed Queen Washer

By following these steps and implementing regular maintenance practices, you can ensure that your Speed Queen washer remains in pristine condition, providing you with years of reliable and efficient laundry care.

Questions You May Have

Q: How often should I clean the filter in my Speed Queen washer?

A: It’s recommended to clean the filter every 3-6 months, or more frequently if you notice any signs of clogging.

Q: What if the filter is damaged?

A: If the filter is torn or damaged, it’s important to replace it immediately to prevent further issues.

Q: Can I use any type of cleaner to clean the filter?

A: Avoid using harsh chemicals or abrasive cleaners on the filter. Simply rinse it thoroughly under running water and use a soft brush or sponge to remove debris.