Keep your primo top load water dispenser germ-free: comprehensive cleaning instructions

Maintaining a clean and hygienic water dispenser is crucial for ensuring the safety and quality of your drinking water. If you own a Primo water dispenser top load, it’s essential to perform regular cleaning to prevent bacteria and mold buildup. This comprehensive guide will provide you with step-by-step instructions on how to clean your Primo water dispenser top load effectively.

Materials You’ll Need

• White vinegar
• Warm water
• Soft cloths or sponges
• Bottle brush
• Bleach (optional)

Step-by-Step Cleaning Instructions

1. Unplug and Empty the Dispenser

• Unplug the water dispenser from the power outlet.
• Empty the water from the reservoir and the cold water tank.

2. Remove the Reservoir

• Lift the reservoir off the base of the dispenser.
• Remove the lid and empty any remaining water.

3. Clean the Reservoir

• Fill the reservoir with a mixture of equal parts white vinegar and warm water.
• Let the solution sit for 30 minutes to dissolve any mineral deposits or bacteria.
• Use a soft cloth or sponge to wipe down the inside of the reservoir, paying special attention to the corners and crevices.
• Rinse the reservoir thoroughly with warm water.

4. Clean the Base

• Wipe down the base of the dispenser with a damp cloth.
• Use a bleach solution (1 part bleach to 10 parts water) to disinfect the base.
• Rinse the base thoroughly with water.

5. Clean the Spigot

• Remove the spigot by unscrewing it from the base.
• Use a bottle brush to clean the inside of the spigot.
• Soak the spigot in a vinegar solution for 15 minutes.
• Rinse the spigot thoroughly with water.

6. Clean the Drip Tray

• Remove the drip tray from the base.
• Wash the drip tray with warm soapy water.
• Rinse the drip tray thoroughly with water.

7. Reassemble the Dispenser

• Reattach the spigot to the base.
• Place the reservoir back on the base.
• Fill the reservoir with fresh water.
• Plug the water dispenser back in and let it run for a few minutes to flush out any remaining vinegar or bleach solution.

Additional Tips

• Clean your Primo water dispenser top load every 2-3 months to prevent buildup.
• If you notice any mold or mildew on the dispenser, clean it immediately using a bleach solution.
• Replace the water filter regularly according to the manufacturer’s instructions.
• Never use abrasive cleaners or steel wool to clean the dispenser as they can damage the surface.

Recommendations: Sparkling Clean for Pure Hydration

By following these simple steps, you can ensure that your Primo water dispenser top load is sparkling clean and ready to provide you with pure, refreshing water for many years to come. Remember, regular cleaning is essential for maintaining the health and safety of your water supply.

What You Need to Learn

1. How often should I clean my Primo water dispenser top load?

You should clean your Primo water dispenser top load every 2-3 months.

2. What type of vinegar should I use to clean my water dispenser?

Use white vinegar for cleaning your water dispenser.

3. Can I use bleach to clean my water dispenser?

Yes, you can use a bleach solution (1 part bleach to 10 parts water) to disinfect the base of your water dispenser. However, be sure to rinse the base thoroughly with water after using bleach.

4. How do I know if my water dispenser needs cleaning?

You may need to clean your water dispenser if you notice any mold or mildew, a change in water taste or odor, or a decrease in water flow.

5. What should I do if I notice mold or mildew on my water dispenser?

If you notice mold or mildew on your water dispenser, clean it immediately using a bleach solution. Be sure to rinse the dispenser thoroughly with water after using bleach.