Fix lg washer dryer filter clogs yourself: simple diy guide

Maintaining the cleanliness of your LG washer dryer is crucial for its optimal performance and longevity. One of the essential tasks in this regard is regularly cleaning the filter to prevent clogs and ensure efficient operation. This comprehensive guide will provide you with step-by-step instructions on how to clean LG washer dryer filters effortlessly.

Identifying the Filter Location

The filter in LG washer dryers is typically located in the front of the machine, behind the bottom kickplate. To access the filter, follow these steps:

1. Open the washer dryer door.
2. Locate the kickplate at the bottom of the machine.
3. Pull down on the kickplate to release it from its hinges.

Removing the Filter

Once you have located the filter, remove it carefully to avoid spilling any trapped water or debris.

1. Locate the filter handle or knob on the filter housing.
2. Turn the handle or knob counterclockwise to unlock the filter.
3. Pull the filter straight out of the housing.

Cleaning the Filter

1. Rinse the filter with water: Hold the filter under running water to remove any loose debris or lint.
2. Use a brush or sponge: If the filter is heavily clogged, use a soft-bristled brush or sponge to gently remove any stubborn lint or dirt.
3. Inspect the filter screen: Check the filter screen for any tears or damage. If the screen is damaged, replace the filter.
4. Rinse the filter again: Rinse the filter thoroughly with water to remove any remaining debris.

Reinstalling the Filter

Once the filter is clean, it’s time to reinstall it:

1. Align the filter: Place the filter back into the housing, ensuring it is properly aligned.
2. Turn the handle or knob: Turn the handle or knob clockwise to lock the filter in place.
3. Close the kickplate: Lift the kickplate back into place and press it firmly to secure it.

Frequency of Cleaning

The frequency of cleaning the LG washer dryer filter depends on the usage and water conditions. As a general guideline, it’s recommended to clean the filter every 1-2 months. However, if you notice reduced water flow or strange noises during operation, it may indicate a clogged filter and require more frequent cleaning.

Additional Tips

• Clean the filter even if it doesn’t appear dirty to prevent clogs from forming.
• If the filter is heavily clogged, soak it in a solution of warm water and vinegar for 30 minutes before cleaning.
• Avoid using harsh chemicals or abrasive cleaners to clean the filter.
• If you have any difficulties cleaning the filter or have any other concerns, consult the user manual or contact LG customer support.

Troubleshooting Common Filter Issues

Clogged Filter

• Reduced water flow
• Strange noises during operation

Damaged Filter Screen

• Water leaks
• Inefficient filtering

Filter Not Sealing Properly

• Water leaks
• Reduced water flow

Wrapping Up

By following these steps and tips, you can effectively clean the filter in your LG washer dryer and ensure its optimal performance. Regular maintenance will extend the lifespan of your appliance and provide you with clean and fresh laundry for years to come.

Questions We Hear a Lot

Q: How often should I clean my LG washer dryer filter?
A: Every 1-2 months, or more frequently if you notice reduced water flow or strange noises.

Q: Where is the filter located in my LG washer dryer?
A: In the front of the machine, behind the bottom kickplate.

Q: Can I use harsh chemicals to clean the filter?
A: No, avoid using harsh chemicals or abrasive cleaners. Use warm water and vinegar or a mild detergent instead.

Q: What should I do if the filter is damaged?
A: Replace the filter immediately to prevent leaks or inefficient filtering.

Q: How can I prevent the filter from clogging frequently?
A: Clean the lint trap in your dryer regularly, and avoid overloading the washer dryer.