Warming tips for cozy home heating
Guide

Say goodbye to grime! ultimate cleaning hack for your fisher paykel dishwasher drawer

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er,...

What To Know

  • Once you have cleaned all the components of the dishwasher drawer, run a cleaning cycle using a dishwasher cleaner.
  • After the cleaning cycle is complete, wipe down the drawer again with a damp cloth to remove any remaining residue.
  • Dry the drawer with a clean cloth and reinstall it in the cabinet.

Dishwashers are a lifesaver in any kitchen, but they also require regular cleaning to keep them running efficiently and hygienically. If you own a Fisher & Paykel dishwasher drawer, you’ll need to know how to clean it properly. This comprehensive guide will walk you through the entire process, step by step, so you can keep your dishwasher sparkling clean and in top condition.

How to Clean Fisher & Paykel Dishwasher Drawer

1. Gather Your Supplies

Before you start cleaning, gather all the necessary supplies:

  • Soft cloths or sponges
  • White vinegar
  • Baking soda
  • Dishwasher cleaner
  • Toothbrush (optional)

2. Remove the Drawer

Begin by removing the dishwasher drawer from its cabinet. To do this, open the drawer completely and locate the release levers on the sides. Squeeze the levers together and pull the drawer straight out.

3. Clean the Exterior

Wipe down the exterior of the drawer with a damp cloth. If there are any stubborn stains or food residue, use a soft sponge with a small amount of dish soap. Rinse the drawer thoroughly with clean water and dry it with a clean cloth.

4. Clean the Filter

The filter is located at the bottom of the drawer. Remove it by turning it counterclockwise. Rinse the filter under running water to remove any food debris or particles. You can also use a toothbrush to gently scrub away any stubborn grime.

5. Clean the Spray Arms

The spray arms are located inside the drawer and are responsible for distributing water during the wash cycle. Remove the spray arms by pulling them straight up. Inspect the spray arms for any clogs or blockages. If necessary, use a toothpick or thin wire to clear any debris. Rinse the spray arms thoroughly with water and reinstall them.

6. Clean the Drain

The drain is located at the bottom of the drawer. Remove the drain cover by turning it counterclockwise. Clean the drain with a soft cloth or sponge to remove any food particles or grease. Rinse the drain thoroughly with water and reinstall the cover.

7. Run a Cleaning Cycle

Once you have cleaned all the components of the dishwasher drawer, run a cleaning cycle using a dishwasher cleaner. This will help to remove any remaining dirt, grime, or odors from the dishwasher.

8. Wipe Down the Drawer Again

After the cleaning cycle is complete, wipe down the drawer again with a damp cloth to remove any remaining residue. Dry the drawer with a clean cloth and reinstall it in the cabinet.

Tips for Keeping Your Dishwasher Drawer Clean

  • Run the dishwasher regularly, even if it’s not full. This will help to prevent food residue from building up and clogging the dishwasher.
  • Rinse dishes thoroughly before loading them into the dishwasher. This will help to remove any excess food particles that could clog the dishwasher.
  • Clean the dishwasher filter regularly. This will help to prevent clogs and ensure that the dishwasher is working properly.
  • Run a cleaning cycle with dishwasher cleaner every month or two. This will help to keep the dishwasher clean and free of odors.

Troubleshooting Common Dishwasher Drawer Problems

  • Dishwasher is not draining: Check the drain and drain cover for clogs. If the drain is clear, the problem may be with the dishwasher’s pump.
  • Dishwasher is not filling: Check the water supply to the dishwasher. Make sure that the water valve is turned on and that there are no kinks or leaks in the water line.
  • Dishwasher is not cleaning dishes: The spray arms may be clogged. Remove the spray arms and clean them with a toothpick or thin wire.
  • Dishwasher is making noise: The dishwasher may be overloaded. Remove some of the dishes and try running the dishwasher again. If the noise persists, the problem may be with the dishwasher’s motor.

Top Questions Asked

How often should I clean my Fisher & Paykel dishwasher drawer?

It is recommended to clean your dishwasher drawer every month or two, or more often if you use it frequently.

What is the best way to clean the dishwasher filter?

The best way to clean the dishwasher filter is to rinse it under running water. You can also use a toothbrush to gently scrub away any stubborn grime.

What should I do if my dishwasher is not draining properly?

If your dishwasher is not draining properly, check the drain and drain cover for clogs. If the drain is clear, the problem may be with the dishwasher’s pump.

Was this page helpful?

Rob Sanders

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er, Rob takes pride in testing out the latest tools and gadgets to see how they can make home projects easier. When it comes to heating systems, he's evaluated over 50 different furnace and boiler models over the years. Rob founded Nurturing Homeaid with his business partner Jim in 2020 to provide homeowners with genuine product recommendations they can trust. In his free time, Rob enjoys remodeling old homes with his family and traveling to visit architectural landmarks across the country. He holds a bachelor's degree in Journalism from Syracuse University.
Back to top button