Effortlessly maintain your bissell vacuum: a comprehensive guide to cleaning the tank

Maintaining a clean and efficient Bissell vacuum tank is crucial for optimal performance and longevity. A dirty tank can lead to reduced suction power, unpleasant odors, and potential damage to the vacuum cleaner. In this comprehensive guide, we will delve into the step-by-step process of cleaning your Bissell vacuum tank, ensuring a spotless and well-functioning appliance.

Tools and Materials

Before embarking on the cleaning process, gather the following tools and materials:

• Bissell vacuum cleaner
• Empty trash can
• Soft cloth or sponge
• Mild dish soap
• Water
• White vinegar (optional)

Step 1: Empty the Tank

• Unplug the vacuum cleaner from the power outlet.
• Locate the tank release button and press it to detach the tank from the vacuum cleaner.
• Hold the tank over an empty trash can and shake it vigorously to remove any loose dirt or debris.
• Use your fingers or a soft brush to remove any remaining particles stuck to the tank walls.

Step 2: Remove the Filter

• Open the tank and locate the filter.
• Gently pull the filter out of the tank.
• Inspect the filter for any visible dirt or debris.
• If the filter is heavily soiled, replace it with a new one.

Step 3: Clean the Tank with Soap and Water

• Fill a sink or bucket with warm water and add a few drops of mild dish soap.
• Submerge the tank in the soapy water and gently agitate it to loosen any dirt or debris.
• Use a soft cloth or sponge to wipe down the inside and outside of the tank, paying special attention to any corners or crevices.

Step 4: Rinse the Tank

• Empty the soapy water and rinse the tank thoroughly with clean water.
• Continue rinsing until all traces of soap are removed.
• Shake the tank vigorously to remove any excess water.

Step 5: Disinfect the Tank (Optional)

• To further disinfect the tank, fill it with a solution of 1 part white vinegar to 4 parts water.
• Let the vinegar solution sit in the tank for 15-20 minutes.
• Empty the vinegar solution and rinse the tank thoroughly with clean water.

Step 6: Dry the Tank

• Use a clean cloth to wipe down the tank and remove any remaining moisture.
• Place the tank upside down on a clean surface to allow it to air dry completely.
• Do not reassemble the vacuum cleaner until the tank is completely dry.

Step 7: Reassemble the Vacuum Cleaner

• Once the tank is dry, insert the filter back into the tank.
• Attach the tank to the vacuum cleaner and press the release button to secure it.
• Plug the vacuum cleaner back into the power outlet.

Tips for Maintaining a Clean Tank

• Empty the tank after each use to prevent dirt and debris from accumulating.
• Clean the tank every 3-6 months, depending on usage and the amount of debris collected.
• Replace the filter regularly, especially if it becomes clogged or visibly soiled.
• Avoid using harsh chemicals or abrasive cleaners on the tank, as they can damage the material.

FAQ

1. Why is it important to clean the Bissell vacuum tank?

A dirty vacuum tank can reduce suction power, produce unpleasant odors, and potentially damage the vacuum cleaner.

2. How often should I clean the Bissell vacuum tank?

Clean the tank every 3-6 months, depending on usage and the amount of debris collected.

3. Can I use any type of cleaner to clean the Bissell vacuum tank?

No, use only mild dish soap or a solution of white vinegar and water. Avoid using harsh chemicals or abrasive cleaners.

4. What should I do if the Bissell vacuum tank is cracked or damaged?

For safety reasons, discontinue use of the vacuum cleaner and contact Bissell customer service for further assistance.

5. How can I prevent the Bissell vacuum tank from becoming too dirty?

Empty the tank after each use and clean it regularly as recommended. Also, avoid vacuuming large amounts of fine dust or debris, as this can quickly clog the tank.