Uncover the mystery: how to check maytag dryer heating element for effortless laundry

If your Maytag dryer is not heating properly, it could be a sign that the heating element is faulty. Checking the heating element is a relatively simple task that can be completed in a few minutes. Here are the steps on how to check Maytag dryer heating element:

1. Unplug the Dryer

Before you begin, be sure to unplug the dryer from the power outlet. This will prevent you from getting shocked while you are working.

2. Remove the Back Panel

Once the dryer is unplugged, remove the back panel. The back panel is usually held in place by a few screws. Once the screws are removed, the back panel can be pulled off.

3. Locate the Heating Element

The heating element is located at the back of the dryer drum. It is a metal coil that is surrounded by a metal housing.

4. Check the Heating Element for Continuity

Use a multimeter to check the heating element for continuity. A multimeter is a device that measures electrical resistance. To check for continuity, set the multimeter to the ohms setting. Then, touch one probe to each terminal of the heating element. If the multimeter reads 0 ohms, then the heating element is good. If the multimeter reads infinity, then the heating element is bad.

5. Check the Heating Element for Ground Faults

Use a multimeter to check the heating element for ground faults. To check for ground faults, set the multimeter to the volts setting. Then, touch one probe to the heating element and the other probe to the frame of the dryer. If the multimeter reads 0 volts, then there is no ground fault. If the multimeter reads 120 volts, then there is a ground fault.

6. Replace the Heating Element

If the heating element is bad, it will need to be replaced. To replace the heating element, remove the two screws that hold it in place. Then, pull the heating element out of the dryer. Be careful not to touch the heating element with your bare hands, as it can be hot. Install the new heating element in the reverse order of removal.

7. Test the Dryer

Once the new heating element is installed, plug the dryer back in and turn it on. The dryer should now heat properly.

Troubleshooting Tips

If you are having trouble checking the heating element, here are a few troubleshooting tips:

• Make sure that the dryer is unplugged before you begin.
• Be careful not to touch the heating element with your bare hands, as it can be hot.
• If you are not comfortable checking the heating element yourself, you can call a qualified appliance repair technician.

Wrap-Up

Checking the heating element in your Maytag dryer is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can quickly and easily determine if the heating element is faulty. If the heating element is bad, it will need to be replaced.

Top Questions Asked

1. What are the symptoms of a faulty heating element?

The symptoms of a faulty heating element include:

• The dryer is not heating properly.
• The dryer is taking longer than usual to dry clothes.
• The clothes are coming out of the dryer damp or wet.

2. How often should I check the heating element?

You should check the heating element every few months, or more often if you use the dryer frequently.

3. Can I replace the heating element myself?

Yes, you can replace the heating element yourself. However, if you are not comfortable doing so, you can call a qualified appliance repair technician.