Ge washer drain pump diagnostic: how to detect and fix issues like a pro

Is your GE washer leaving you in a puddle of frustration with its inability to drain properly? Fear not, dear reader! This comprehensive guide will empower you with the knowledge to diagnose and rectify the issue with your washer’s drain pump. Let’s dive right in and restore your laundry routine to its former glory.

1. Gather Your Tools

Before embarking on this troubleshooting adventure, ensure you have the following tools at your disposal:

• Screwdriver (Phillips head)
• Flashlight or work light
• Towels or rags

2. Locate the Drain Pump

1. Unplug the washer from the power outlet.
2. Turn off the water supply valves to the washer.
3. Tilt the washer back slightly to access the bottom panel.
4. Locate the drain pump, which is typically situated at the base of the washer, near the front.

3. Disconnect the Hoses

1. Using a screwdriver, loosen the hose clamps connecting the drain hose and the pump to the washer.
2. Gently pull the hoses away from the pump.

4. Remove the Drain Pump

1. Locate the screws holding the drain pump in place.
2. Remove the screws and carefully pull the pump out of the washer.

5. Inspect the Impeller

1. Shine a flashlight into the pump housing and check for any debris or objects that may be obstructing the impeller.
2. Use a small brush or tweezers to remove any obstructions.

6. Test the Drain Pump

1. Reconnect the drain hose and the pump to the washer.
2. Plug the washer back into the power outlet.
3. Turn on the water supply valves.
4. Set the washer to a drain-only cycle.

7. Observe the Drain Pump

1. As the washer drains, observe the pump for any unusual noises or vibrations.
2. If the pump is not draining properly, it may need to be replaced.

8. Reinstall the Drain Pump

1. If the pump is still functional, reinstall it by reversing the disassembly steps.
2. Tighten the screws securely.
3. Reconnect the hoses and tighten the hose clamps.

9. Run a Test Cycle

1. Set the washer to a full wash cycle.
2. Observe the washer’s performance to ensure it is draining properly.

Troubleshooting Tips

• If the drain pump is clogged, try using a drain cleaner specifically designed for washing machines.
• If the impeller is damaged or worn, it may need to be replaced.
• If the drain pump is humming but not draining, it may be faulty and require replacement.

Answers to Your Questions

Q: How often should I check my GE washer drain pump?
A: It is recommended to check the drain pump every 6-12 months, especially if you notice any drainage issues.

Q: Can I clean the drain pump myself?
A: Yes, you can clean the drain pump by following the steps outlined in this guide. However, if you encounter any electrical issues, it is advisable to seek professional assistance.

Q: How much does it cost to replace a GE washer drain pump?
A: The cost of replacing a GE washer drain pump varies depending on the model and the source of the replacement part. Expect to pay between $50 and $200 for the part and labor.