Warming tips for cozy home heating
Guide

Urgent how to change an lg washer drain hose in 3 easy steps: save time and money

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er,...

What To Know

  • Fortunately, replacing the drain hose is a relatively simple task that you can tackle yourself with the right tools and a little patience.
  • The drain hose typically extends from the back of the washer to a drainpipe or standpipe.
  • Connect one end of the new drain hose to the washer’s drain pump and tighten the clamp securely using the adjustable wrench.

The drain hose, a critical component of your LG washer, ensures the smooth expulsion of wastewater. However, over time, it can develop leaks or clogs, hindering your laundry routine. Fortunately, replacing the drain hose is a relatively simple task that you can tackle yourself with the right tools and a little patience. This comprehensive guide will walk you through the process of changing the LG washer drain hose, empowering you to restore your appliance’s functionality.

Tools and Materials You’ll Need:

  • New LG washer drain hose
  • Adjustable wrench
  • Pliers
  • Bucket or shallow pan
  • Rags or towels

Safety Precautions:

Before you begin, ensure safety by unplugging your LG washer and turning off the water supply.

Step-by-Step Instructions:

1. Locate the Drain Hose:

The drain hose typically extends from the back of the washer to a drainpipe or standpipe. Follow the hose to identify its connection points.

2. Disconnect the Drain Hose from the Washer:

Using the adjustable wrench, loosen the clamp securing the drain hose to the washer’s drain pump. Gently pull the hose away from the pump.

3. Disconnect the Drain Hose from the Drainpipe:

Locate the other end of the drain hose connected to the drainpipe or standpipe. Use pliers to loosen the clamp and carefully detach the hose.

4. Clean the Drain Pump and Drainpipe:

While the drain hose is removed, take this opportunity to inspect and clean the drain pump and drainpipe. Remove any debris or blockages that may have accumulated.

5. Install the New Drain Hose:

Connect one end of the new drain hose to the washer’s drain pump and tighten the clamp securely using the adjustable wrench. Then, connect the other end of the hose to the drainpipe or standpipe and tighten the clamp with pliers.

6. Test the Connection:

Turn on the water supply and plug in your LG washer. Run a short wash cycle to test the new drain hose for leaks.

7. Reposition the Washer:

Once the test run is complete, slide the washer back into its original position.

Troubleshooting Tips:

Drain Hose Leaking:

  • Check the tightness of the hose clamps at both ends.
  • Inspect the hose for cracks or tears.
  • Replace the drain hose if necessary.

Washer Not Draining:

  • Ensure the drain hose is properly connected to the washer and drainpipe.
  • Check for clogs in the drain hose, drain pump, or drainpipe.
  • Reset the washer by unplugging it for a few minutes and plugging it back in.

Washer Draining Slowly:

  • Clean the drain pump and drainpipe to remove any blockages.
  • Check if the drain hose is kinked or bent.
  • Replace the drain hose if it is damaged or old.

What You Need to Learn

Q: How often should I replace the drain hose on my LG washer?
A: It is generally recommended to replace the drain hose every 3-5 years or as needed if it shows signs of damage or leaks.

Q: Can I use any type of drain hose for my LG washer?
A: No, you should use a drain hose specifically designed for your LG washer model. Using an incompatible hose can void your warranty or cause damage to the washer.

Q: What are the signs of a damaged drain hose?
A: Leaks, cracks, tears, kinks, or blockages are all signs of a damaged drain hose.

Was this page helpful?

Rob Sanders

Rob is a seasoned home improvement writer with over 15 years of experience researching and recommending products for the home. Prior to starting Nurturing Homeaid, he wrote extensively for This Old House magazine and has been featured as a home expert on several TV and radio programs. An avid DIY-er, Rob takes pride in testing out the latest tools and gadgets to see how they can make home projects easier. When it comes to heating systems, he's evaluated over 50 different furnace and boiler models over the years. Rob founded Nurturing Homeaid with his business partner Jim in 2020 to provide homeowners with genuine product recommendations they can trust. In his free time, Rob enjoys remodeling old homes with his family and traveling to visit architectural landmarks across the country. He holds a bachelor's degree in Journalism from Syracuse University.
Back to top button